SEGA Blog SEGA Blog Homepage SEGA on Facebook SEGA on Twitter SEGA on Flickr SEGA on YouTube

Archive for ‘SEGA 3D Classics’


SEGA 3D Classics – Galaxy Force II Interview with Developer M2

3D Galaxy Force II

Our next article is all about Galaxy Force II and is a must read for any old school arcade fan, or really anyone unfamiliar with the Galaxy Force game. They said it couldn’t be done, but M2 delivers an arcade perfect port of Galaxy Force II with full 60fps delivered in face melting 3D. It’s a sight to behold, we hope you enjoy both the game and the interview!

Thanks again to Game Watch and Impress, Okunari-san, and Horii-san for their involvement in making these interviews available to our western audience. Thanks to Siliconera for coordinating with us to help spread the word to SEGA fans across the web. And special thanks to our producer Sam for translating these interviews for everyone’s enjoyment.

As always, your comments are appreciated!


3D Galaxy Force II

Left, Naoki Horii, M2 President, Right, Yousuke Okunari, SEGA CS3 Producer

3D Galaxy Force II

Galaxy Force II Background
Galaxy Force was first released in arcades in 1988. Whereas Afterburner’s ‘double cradle’ arcade cabinet allowed for forward, backward and left/right movement on two axes, Galaxy Force’s cabinet allowed for more than 300 degrees of movement to the left and right and came in two varieties: a compact “Deluxe” version with slightly restricted movement, and a “Super Deluxe” version that added up and down movement as well. The more expensive Super DX version was a larger machine, requiring a wide area to be chained off for safety purposes. Since many smaller arcades were unable to accommodate this space requirement, the Super DX version did not see wide distribution. Its main board was called the Y-Board (a revision of the previous X-board), with three MC68000 CPUs. This hardware dropped the number of backgrounds, but it could display a larger number of sprites and had advanced sprite-scaling features. It was well-equipped for sound, with a PCM-enabled YM2151 chip (FM sound source). The game displayed at a 320×224 pixel resolution.

The cabinet was equipped with a throttle on the left to control the speed of your ship TRY-Z (your ship), and a control stick on the right for controlling its lateral and vertical movement. The original Galaxy Force ended after only four stages, but a sequel was released about two months later as Galaxy Force II which fixed a number of issues with the game, added two more stages, and allowed you to select your starting stage. Effectively all machines in operation were converted to II, so unmodified originals became rare.

Ports of Galaxy Force to the Mega Drive, FM-TOWNS, and the Sega Saturn were all based on Galaxy Force II, with only the international Master System port being an exception. Then in 2007, an M2-developed “Special Extended Edition” was released as part of the SEGA AGES 2500 series for PlayStation 2. This was not just an arcade port, but included the MegaDrive and Master System versions as well, as well as a “neo classic version”, which featured enhanced graphics and sound options, widescreen, higher resolution on in-game objects and transparencies.

“It’s not going to run.” “Ok, then how can we get it running?”

– To start off, I’d like to ask how you went about deciding to bring back this arcade title. I recall you mentioned the last time we talked that there was a significant difficulty jump from porting Space Harrier and Super Hang-on to porting Galaxy Force II.

Yousuke Okunari (below, YO): OK well first, when we were choosing the lineup for the 3D Remaster Project, we had to consider which games would really stand out. You know, which games would have the most impact if we put them into 3D. We wanted to do Space Harrier first, but once that was in 3D, I had to think about which game would be the most well-received, and…

Naoki Horii (below, NH): You settled on Thunder Blade, right?

YO:Galaxy Force II was the obvious choice.

NH: You just totally ignored me!

– (laughs)

YO: When we made the SEGA AGES 2500 version for the PS2, we were able to recreate the game with more modern touches by making some graphical improvements (increasing the resolution of objects by 4x, adding support for transparencies and widescreen) in the “Neo Classic Mode”. When I was getting the 3DS project off the ground, I thought that if we could add 3D to the game, it would remove the difficulty spikes you experience when you go into the cave sections of the game. From the beginning, I asked M2 to make that one of their goals.

M2 had some experience working on Space Harrier at that point so they had an understanding of how much work would go into the port. And they told me, “GF2 is out of the question.” The Y-Board that GF2 uses is about 1.5 times harder to port than Space Harrier. Still, M2 had spent about two years analyzing the arcade board for the PS2 version, so in some ways you could say they had made it their own at that point. I told them “you’ll be fine!”, and had them begin production.

NH: After finishing the PS2 version, I felt like I really wanted to make that version of the game portable. At the time, I was thinking PSP. You can use the PSP to view still images, so I made some mockup images of widescreen GF2 and put them on my PSP. And boy, they looked really stunning. Before you worry about whether a game’s going to run or not, you need to see if it even looks good, you know?

So then we tried to build prototype, but no one could get it running on the PSP. Though if we tried now, we probably could get it running. Regardless, I wanted to get GF2 running on a handheld in widescreen. That’s when Okunari-san said that he wanted to work on 3DS. It was like a godsend, so we gave it a shot. Now that I think about it, I should have realized that given how much trouble we had porting it to the PSP, we’d have just as much on the 3DS. But I was caught up in the fact that we finally had a chance to make a portable version.

– (laughs)

YO: So then your whole team had to figure out how to make it work.

– Well, considering that you’d already finished your hardware analysis when you did the first port, it seems like everything would be OK…but you weren’t yet thinking about which hardware you’d wind porting it to, right?

NH: That’s right.

– So when you decided to bring it to 3DS, you must have known that it had three 68000s rather than the two that Space Harrier had…

NH: Well, we hadn’t started working on Space Harrier at that point.

YO: The idea was that the first project milestone was Space Harrier, and if that went well, then we’d move onto the next game. GF2 was one of those next games. We weren’t going to get anywhere if we couldn’t do Space Harrier. We’d already included stereoscopic 3D for Super Hang-on on PlayStation 3 and Xbox 360, so it was just a matter of bring that over to the 3DS. So when we thought about which title we wanted to remake in 3D next, Galaxy Force II was the natural choice.

– So the three arcade titles were never actually being worked on in parallel then? You did them one at a time.

NH: That’s correct. But there are things we learned during the process, and as Space Harrier progressed, we came to realize that this aspect or that feature would probably be very difficult to do when we got to GF2.

YO: Up until just before its release, the processing that 3D Space Harrier required to maintain 60 frames a second wasn’t occurring in the frame time needed (when all the processing for a single frame draw does not occur in 1/60th of a second, it slips over into the next frame, delaying the frame draw. This creates what people perceive as ‘lag’). Then, despite all the work we put into 3D Space Harrier, 3D Super Hang-on wasn’t running at a perfect 60 FPS either up until about a month before release it because we added gyro controls etc. So when I was getting the project off the ground, I asked M2 when they’d be able to do GF2, and they told me that there’s no way they could get the game working. We had this big meeting, with M2 on one side saying, “It’s not going to run,” and me on the other asking, “Well, then how can we get it running?”

NH: Yeah, we figured that porting GF2 along the same lines as Space Harrier ultimately wouldn’t pan out. We’d have to take a completely different approach to how we were drawing to the screen, so we wound up assigning one programmer to create graphics for GF2 and write a specialized rendering routine for the Y-Board.

The idea was to run GF2 on the 3DS’s upper screen, and optimize the processing by outputting a graphical cache data to the bottom screen. Basically. So we went about painstakingly calculating ways to cache data that would avoid speed drops, and finally got where we needed to be.

– You had to throw out the methodology you’d struggled with on Space Harrier and start all over.

NH: Yes, we had to step up the way we were going about it.

YO: Simply put, we had to include the processing of a whole extra CPU in there. The last port barely ran when it was emulating two CPUs, and now we had three.

– So not only does the 3DS have to deal with that extra processing, the arcade board itself also had an added CPU and an increase in the number of sprites it could draw, because at the time, boards would double in power every time a new one came out, right? The GF2 arcade board had some specialized sprite-scaling hardware, didn’t it?

3D Galaxy Force II

A picture of someone’s GF2 board sitting on a Micomsoft XAC-1 computer desk at M2.

NH: Yes, GF2 had a much more powerful board (compared to Space Harrier’s). It really was twice the game, and the board had 68000’s lined right up on it like bam, bam, bam, along with the ROM itself. You look at it and all you can do is cross your arms and frown. (laughs)

– All your efforts in optimization were offset by the performance increases with the more powerful Y-Board.

NH: Of course, you can’t just rely on ‘optimization’ to make up for the difference, you have to scrape together memory by saving calculation time and resources here and there. We optimize the rendering, and we can optimize the 68000-side code as well. The process is like filling a cup with 1,000 rain drops. Thankfully, our optimization had made some really incredible progress, to the point where it looked like we could squeeze sound emulation in there as well.

But in the end, there were some snags, and we got concerned that we wouldn’t be able to get the game running at 60 FPS. It just didn’t end up being that easy.

– I remember you said that the last two games used the internal sound processor to do BGM emulation, but are you saying that this one uses streaming instead?

YO: If you switch from emulated sound to streaming, you do save a little bit on processing power[1]. For awhile during the early development, M2 was building the game without any sound playing. I forget, was there a time where you had sound emulation running?

NH: For this one? No, I don’t think so.

YO: At some point, they finally showed me a version of GF2 that was running at more or less 30 FPS with some slowdown.

NH: Here. This was a version we built just to see if the emulation engine would run, with no graphical optimizations or anything.  (hands over a 3DS)

– Ooooh! Yeah the frame rate is a bit slow but the game works, that’s for sure. The sprites also aren’t displaying quite right but you can tell where you are. Right now I’m inside a cave.

NH: As you can imagine, this was the point we knew we wanted to make the project happen. The game looks like it’s running in slow motion, but we thought we’d be OK if we could just get it running twice as fast. We didn’t know if all the in-game objects would even fit into memory, but we did have some ideas on how to speed things up. We knew we couldn’t just drop the ROM in as-is, we had to adapt the code in a way that made sense for the 3DS hardware.

– So you were already thinking about it in a completely different way than you approached 3D Space Harrier. As if it was a totally new title.

NH: Well, 3D Space Harrier had a little more trial and error involved in it. And we had an easier time porting its data over as well.

– So once you ported the 3D Space Harrier ROM, getting its performance up to speed was the hard part?

NH: It took a while. Getting it to run at a smooth 60 frames per second was the hard part. There are places where even the original arcade board suffers from slowdowns and frame drops.

YO: Around the time of this version, Horii-san told me:  “This is what we’ve got so far. It’s still pretty far away from a finished product.” But this is M2 we’re talking about, and they always get things to run lighter and faster over time. They already had this one working at 20-30FPS. M2 just had to press on with performance acceleration, so I convinced myself that we’d be fine.  (laughs)

NH: Well it’s true, and Okunari-san knows this from working with us. We say things like, “Man, online play in Game Gear titles? That’s going to be rough,” or, “Ad hoc play working on a MegaDrive game? Yeah right!” And then we go and get GF2 running, it makes no sense. (laughs) I wonder why it runs!

– (laughs)

“Bring the sprite quality up to Neo Classic standards”

YO: Anyways, so M2 had the game working. Kind of. And when they were telling me how they might be able to get sound emulation functioning, I turned around and said that hey, since the graphics are work, the next step is building the game to the Neo Classic version’s specs (the SEGA AGES 2500 version with enhanced graphics). Namely because it didn’t matter if we got the arcade version running. Fans would be expecting the Neo Classic version’s graphics. I didn’t want to have the 3DS port looked at as inferior. So I told them that the 3DS version had to live up to the Neo Classic standards or bust.

They came back and said, “Oh, you want transparencies? Not a problem.” “No, no, no,” I said. “Not just that. I want the pixel art the same as well.” M2 had redrawn all the graphics in 4x resolution for the PS2 version, so it would be a waste if we didn’t use those assets.

NH: But that meant that, we’d be putting object data four times larger than the original into a straight arcade port that we had barely got running. I.e. it’s going to take four times the memory! At that point, we had no idea if the arcade version’s data would even fit into memory, let alone with graphics 4 times their original size. It was fantasy land. But I knew what the fans would want, and personally, I thought, “We’re a decade into the 21st century, damnit! This is what people are expecting.” At the same time, the dev team had a kind of “what have we gotten ourselves into” feeling.

YO: The 3DS’s resolution is 400×240 pixels, so excluding the space to the left and the right, it’s pretty close to the arcade version’s native resolution. So M2 said hey, we can replicate the arcade graphics dot by dot at a 1-to-1 ratio, so why not just go with the original arcade resolution. The thing is though that in GF2, sometimes enemies will fly at you from behind and at other times you’ll fly through the background. I told them that I didn’t want to see any of that jaggy pixilation when objects were zoomed in on!

NH: Yeah. Afterburner is the same way. And I knew Okunari-san would say something like that, which is why I said, “Isn’t a port of the original game good enough!?” Now of course, the higher resolution graphics would of course look best if we could actually implement them…

YO: So I told Horii-san: “The higher res graphics are going to look awesome, just give it a try.” (laughs) I knew they wouldn’t have quite the dramatic impact they had in the PS2 version, but it would have some effect. What could it hurt?

NH: …This guy, I swear. Anyways, so here I was, not knowing if the game would run at 60 FPS or not, and I say, “OK, fine. We’ll do it.” So we stopped trying to load all the graphics for all the stages into memory as a single pack, and instead bundled the graphics into individual packs per stage. The project manager told me “we haven’t even got the basic framework working and you’re really going to do something way beyond it?”

YO: M2 had to rebuild the game so it would load the high res graphics a stage at a time.

NH: Thankfully however, it was pretty easy compared to the work we had to do to up-res the roughly 10,000 images we used in the PS2 version. The thing was though, that if we screwed up while packing the graphics, they wouldn’t show up on screen, so there was the danger that that we might get bugs that we couldn’t even locate because the graphics wouldn’t show up. At any rate, we went and split them up into packs anyway, loaded them per stage and then dropped them into the 3DS’s memory. It goes without saying that at this point we still didn’t know if we could get the game running at 60 frames a second.

– This sounds like it’s shaping up to be a rather reckless project. (laughs)

YO: What’s more, there isn’t enough time to load data between stages (when you start up GF2, you can choose which stage you want to play, which changes the stage order, and in turn affects what needs to be loaded). M2’s technical prowess keeps the load times short.

NH: Well, it’s more about the team’s hard work than it is technical prowess per se. I’ve seen some comments on the net saying, “Man, those guys must really be grinding away in the pits on this stuff,” and it’s absolutely true. It’s like collecting and saving pennies to buy something really expensive.

– Yeesh. (laughs) You can’t help but groan a bit.

NH: Okunari-san’s schedules are absolute. All while he’s saying, “Let’s do this. Let’s try that.” He is a shady guy. Really shady. I’m secretly studying his ways.

YO: (laughs) But you got the game running at 60 frames per second with high res graphics! It just took a bit longer than we planned….

NH: Ah! …Well, it didn’t take as long the PS2 version, at least. That one dragged on for a year.

– (laughs)

YO: The 3DS version took about the same…

NH: … Er…Hmmm… In any case, the result is that the sprites don’t pixelate when they’re scaled. You might not notice unless you go out of your way to directly compare them, but the difference is tremendous.

YO: Oh yeah and once you clear the game, you’ll unlock the ability to select the original unaltered arcade version, where you can get a good idea of how nice the higher res graphics and transparencies are.

– Oh, you can play the original arcade version, too?

YO: Now don’t be surprised by the fact that the ending has no sound. (laughs) That’s how it was in the arcade. Anyways, thanks to M2, GF2 on 3DS is now the best replication of the game to-date. We thought that the PS2 version was the most complete version, but its one weakness was that it’s hard to know where you’re going in the caves.

3D Galaxy Force II

A screen from Arcade Mode.

That’s where the stereoscopic 3D helps. We knew that if we added in 3D, the game would be easier to navigate. And as we were building, it was interesting watching our hypotheses get proven right before our eyes. It got faster and faster as M2 worked on it, from 15 FPS, to 20 FPS, to 30 FPS, and every time it got better looking. Once it hit 60 FPS, I thought, “Man, this is so much easier on the eyes!” The differences between the sprites are very clear when the graphics are displaying so fast due to the high frame rate. I realized that rendering the cave scenes at 60 FPS was a must in 3D.

M2 told me at first that the game might drop to 30 FPS when in the caves, due to rendering overhead and memory issues, but I said, “Well, as long as the game speed itself doesn’t slow down, I guess we’ll have to deal with it.” But in the end the caves runs more or less at 60 FPS, and the difference vis-a-vis 30 FPS is clear as day. It made me feel like the game really matched well with its rendering speed.

In 3D Space Harrier’s case, the blessings you get from bringing an old shooting game to 3DS are that you can now dodge all the pillars, and you know where you need to be to dodge or avoid getting hit by the second stage boss. The caves in GF2 are ALL pillars, so it’s very easy to see their boundaries now.

NH: Taking in how huge outer space is, or flying through one of the solar prominences like “ahhhh” feels amazing. It makes everything worth it.

YO: We knew this game would be great with 3D, but you could say it’s even better than we imagined. You really do feel like there’s a 3D space within the game. There is a feeling of substance, something that’s a little different from 3D polygons, that’s very well-realized here. This game design approach was popular right before the 3D polygon aesthetic became the norm, and it’s sort of a lost art from a transition period in the game industry. But when we put GF2 into stereoscopic 3D, it made me wish that this had been the way things had kept going. It almost has a steampunk type of appeal to it, you know what I mean? 3D created by overlapping sprites.

– The difference between Space Harrier and Galaxy Force II is that for GF2 during the cave scenes etc., there are sprites all around you to the top, bottom, left and right. In Space Harrier, the ground surface is just there and scrolls to give the game a sense of speed, but for the Galaxy Force II caves, sprites are drawn for all four directions, which gives the game a different look.

I believe this technique started with Afterburner. The sprites are scaled up as they fly towards you, but if they don’t move really fast, it starts to look a little strange, like the sprites aren’t connected to each other. If you don’t render the sprites well, the graphics probably will look pretty clunky in 3D even if you go to the trouble of adding depth information. It always bothered me when you get shot down in Afterburner and lose speed. Sometimes all the sprites wind up lining up in a horizontal line. (laughs)

NH: Now there were some polygon games as well that would start gradually rendering things from far off.

– That’s true, but it always felt off to me. When I played Galaxy Force II, I really got a sense of how important it is to balance depth, draw speed and  sprite movement speed.

YO: I think another reason the game looks pretty is because we added the transparencies in. That makes it much easier to see things. The way the lava feels, the way the water flows, it all blends together beautifully and the backgrounds look amazing because of the transparent effects.  When we built GF2 for PS2, we put everything in it that we could think of, and the result was the Neo Classic version. But since we’re on a new system now, the graphics are on a new level.

3D Galaxy Force II3D Galaxy Force II

Left: Special Mode (widescreen), Right: Arcade Mode (widescreen)

NH: When we were working on the PS2 version, we actually tried to see if we could increase the number of sprites that fly at you by tweaking GF2’s original programming. Ultimately we weren’t able to do it, but we’ve been able to make the game easier to play in a different way: by adding in stereoscopic 3D.

– I noticed this when playing the last stage, but I think that you can really feel more aware of objects when you’re playing in 3D, versus 2D.

YO: The last stage has that part in the beginning where you’re flying out of a hyper-dimensional wormhole, the background is all windy and you feel like you are flying through some area with cool visual effects, but you don’t really know what’s going on and you run into the wall a lot at first. Now with 3D available, you can actually see what you need to do! You finally understand that there was a proper path after all! (laughs)

– Exactly. Personally, I always had a hard time distinguishing between space and the background on the last stage. Now that it’s in 3D, it’s like I can see the edges of planes, or like they say in polygon based games, I can see the invisible hit boxes around objects.

NH: Mmm hmm.

– It’s like I can see the borders between walls, there’s collision here. What is that?

YO: I think it’s just how human eyes work. Since we can perceive depth, we feel like this is a wall, and that we’ll hit it. Whereas when you’re playing in 2D, you can be aware of the game field as a single space.

– When you’re playing in 2D, the borders between sprites look like they run into each other, especially on the last stage. But when I’m playing the same stage in 3D, it looks like those borders are floating immediately in front of my eyes. It’s a strange feeling.

YO: I guess if your eyes can receive depth information, they can also sort through the objects on screen.

– I thought the same thing about 3D Space Harrier. When I play arcade games, I can’t completely keep up with what’s going on on-screen, and I end up dodging around in a number 8-shaped pattern. As a result, I end up completely overshooting when I go to dodge things like the Binzbeans in Space Harrier. However in 3D, I feel like I’m aware of where I am and can properly dodge things. It’s completely different.

YO: The same was the case for Space Harrier, but Galaxy Force II was too ahead of its time. In some ways, you could say that the game is now finally truly playable.

– There were some uncomfortable things about games back then. I felt like there was a disconnect from moment to moment in the experience. But now, maybe because of the optical illusion of 3D, it’s like you’re finally able to understand, and things connect.

3D Galaxy Force II

Circle Pad Pro is also supported!

YO: That’s why I feel like Galaxy Force IIis finally complete.

– I see that.

NH: It’s said the same thing about 3D Space Harrier, but I definitely want people to experience the game themselves.

YO: Space Harrier was somewhat easy to play in 2D anyway, but I feel like the difficulty of GF2 has dropped considerably now that it’s in 3D.

NH: Control-wise, the game supports the Circle Pad Pro now too.

YO: Yeah, M2 said they weren’t going to include Circle Pad Pro compatibility at first, but then later on, they turned around and said they wanted to borrow my developer version. (laughs)

NH: The original Galaxy Force II had a control stick on the right, and a throttle on the left, and I really wanted people to be able to play it that way.

3D Galaxy Force II

Backgrounds included for Moving Cabinet mode. They also have depth, so the background looks far away. This is the Super DX Cabinet

YO:You’re still able to change the controls around, so of course you can still move your character using the left thumb pad as well.

Even the background’s moving! Welcome to “Moving Cabinet Mode”!

– You know, it’s almost overwhelming how much easier GF2 is to play once you pick it up and give it a try. As you’ve said, this is the result of countless tiny tweaks adding up to shore up the processing speed. But I can’t believe you got a Moving Cabinet mode in here too, as that would just create even more rendering load.

NH: It does add rendering overhead. However the way we port arcade games and the way we port MegaDrive games is different, so it’s actually easier to put in cabinet modes for games that were originally ride-on cabinets. Either way, we built GF2 from the beginning with the idea that we would include a Moving Cabinet mode.

YO: M2 were the ones who included Moving Cabinet mode in the first place (refer to Space Harrier Interivew), after all, and since it’s in 3D Space Harrier, it had to be in 3D Galaxy Force II. Still, I knew that the base porting work alone was going to be tough, so my position was that it’d be nice if the mode made it in, but it wasn’t a must.

The thing is, the GF2 arcade cabinet really moved and spun around a lot. Following the releases of Outrun and Afterburner, ride-on arcade machine movement became more and more complex. So since the cabinet wasn’t going to move the same as Space Harrier, and we had to replicate it, we felt we needed to make some backgrounds in the same go. When we were working on 3D Space Harrier and 3D Super Hang-on, it would have been nice to get the backgrounds in, but M2 said they couldn’t get them in because a lack of memory and rendering power.

The thing that I pointed out though was that for GF2, if there’s no background, you won’t be able to get a sense for how the machine is moving around… And so one day they were implemented in the ROM.

– (laughs)

NH: You know, I just went and dropped in a picture I’d taken during while cherry blossom viewing at a nearby park, and it looked amazing. It was unreal, like I was playing GF2 in a sunny spring park. So then we got caught up in trying to get the backgrounds in.

YO: We made it so you can choose which background you want.

NH: Yes, you can choose either space or an arcade as your background.

YO: Thunder Blade is in the background of the arcade one. Horii-san’s favorite.

NH: It’s one step closer to my greatest ambition. (laughs)

– I know I’ve said this a dozen times, but it’s amazing you got the Moving Cabinet Mode in, despite GF2 being a more challenging port than Space Harrier, which you said was already tough on its own.

NH: Changing how we built the port was important. I’m confident that what we’ve done here is something other companies wouldn’t be able to catch up to. Not that anyone would bother to try though…

– (huge laugh) Really though, GF2, and its cabinet, were a sort of logical endpoint for the sprite-based games, right?

NH: A culmination of their best aspects, yes.

– Even so, even among the games that you’ve worked on, from that time, there weren’t many you could really call a “beast” in the sprites department. In other words, they aren’t quite sprite-intensive enough to give you the basis for bringing them into 3D.

NH: I wonder if other companies at the time felt that SEGA was working with just sheer force of will.

– SEGA made ride-on games back then by just adding on feature after feature, right?

NH: That’s where a lot of the momentum came from. From Hang-on to Space Harrier, Afterburner, Galaxy Force II. They went as far as the R-360[2].

– That was a serious accomplishment.

YO: It probably had a lot to do with the advancement of computers, and the economic boom that was happening in Japan at the time. We’re talking about an era where arcade kits would sell regardless of price.

– And these games’ arcade machines were very expensive.

YO: Yeah but, I don’t think GF2 sold that many units. (laughs)

NH: Regardless of whether it sold or not, I think people really remember the cabinet. They might remember it as the one that was a bit embarrassing to climb into. For the 3DS port’s Moving Cabinet Mode, we wanted to have people in background who you’d make eye contact with as you play, but we unfortunately wound up having to cut them out.

– Ah! You mean like when you’d get rotated in the cabinet, sense someone looking at you, glance away from the screen and make awkward eye contact with somebody, right? (laughs)

NH: Yeah, that’s the experience we wanted to port! (both laugh) Really wanted to. My staff used a picture of me while building the game, and tried building a version to that effect, but ultimately they weren’t totally happy with the result. So they ended up cutting it.

YO: Maybe we should have had Miis in the background.

NH: Even if we’d done Miis, it wouldn’t replicate the original awkwardness of it. We wanted it to be genuinely uncomfortable when your eyes met the other person’s, you know?

– The fact that when you were playing, the cabinet’s frame was the only protection from other people’s line of sight was definitely a really weird thing about this game.

 NH: When you turned, you’d lock eyes with the people in line waiting to play. We weren’t able to port that this time, but personally I think it gives us material for a new port in the future.

YO: The backgrounds we have in GF2 were something we threw together in the final stages of development, so please forgive how they look. We do hope it can help you remember that time you were playing, made eye contact with somebody and then felt awkward. (laughs)

NH: Give it a shot. It’ll all come back to you: “Oh yeah. There was that one time that guy was watching me…”

– I’m sure my skill also had something to do with it, but the movement of the machine was probably one of the hardest things about that game, personally speaking. The uncomfortable moments when your head would move around as the machine moved and disrupt your line of sight to the game.

NH: That’s why it was an amazing arcade machine. You had to have some balls to get in it, since once you did, you knew it was going to be an embarrassing experience with people looking at you.

– On top of that, since it was chained off for safety reasons, it felt kind you were participating in some kind of show. Almost like: “Please do not touch the equipment.” (laughs) Of course you weren’t though.

YO: Actually, now that I think about it, maybe the idea for the Virtual On’s live monitors[3]  came about from the lessons of GF2.

– Yeah because with that game, other than the person actually playing, no one can really grasp what’s happening in-game by just staring at the screen.

YO: That reminds me. For GF2, the background was just a single-layer graphic, but we added depth information to it so it really feels like you are in the arcade machine. 3D Space Harrier’s frame was a single graphic, so we had to change it up. We also wound up having to include two different types of Moving Cabinets…

– Oh of course. (laughs) Because there’s DX and Super DX versions. Space Harrier and Super Hang-on had cabinets that moved and ones that didn’t, but the games after Afterburner had two different types of moving cabinets didn’t they?

NH: That’s why you’ve gotta just focus on the center of the screen. But backgrounds are something we’ll need to work on as we continue forward with this series. (grins) You know, in preparation for Thunder Blade and all…

YO: … … …

– (laughs)

NH: No comment from Okunari-san, I see. (laughs) He’s not even interrupting me anymore.

3D Galaxy Force II

The Deluxe cabinet faithfully reproduced!

YO: Since we are talking about arcade machines, let’s talk a little about what went into gathering assets for them. GF2 has the DX and Super DX versions, but we only have the regular DX version at SEGA’s storage archive. I really wanted to go see a Super DX version, but I was told that there aren’t any more left in Japan. So I poked around on the net and found a blog where someone wrote back in 2009 that there is a broken machine resting quietly in a ryokan[4]up in Hokkaido.

So I thought, even if it’s not really working right, I can at least record some of the motor sounds. I gave the ryokan a call, but they didn’t really understand what I was talking about. They told me, “I’m not really following you, but it should be there.” So I put in a travel request to fly up there and check it out.

If it was just M2 and myself going, depending on how busted up the cabinet was, there was a possibility that we’d get there and be unable to get any recording done, so we decided to take someone who could fix the machine on the spot if needed. However, we didn’t have anyone at SEGA who could fix that particular machine, so I talked to Ikeda-san at the arcade Mikado in Tokyo’s Takada-no-Baba district, and Tsujisaka-san from Wavemaster. We even decided that if we got there and it looked fixable, then Ikeda-san would consider buying it. So we went ahead and put together an itinerary for the team. But at the last minute, when I went to make a reservation at the ryokan, the person who took my call said, “Oh, I’m terribly sorry. We threw that machine away.” So sadly, we had to cancel the trip. We were even considering asking you (Game Watch) to come as well. (laughs)

– Well, that’s just a shame…

YO: Still, even after that, Horii-san got a lead that there was a guy in Hokkaido that had a Super DX kit. While we’re sitting there wondering why the hell so many people in Hokkaido have Super DX machines, Horii-san reaches out to this individual…

– Wait, it wasn’t the one that was originally at the ryokan, was it?

NH: First, I had the guy send us some pictures. As it turns out, the guy had bought it from a merchant who had picked it up as scrap from the ryokan. But unfortunately, he hadn’t been able to get it working, and by the sound of things, it was going to need some restoration.

YO: And so I had no choice but to look for one by adventuring around the States via YouTube. (laughs) In the end, we had to refer to some bonus footage we’d collected for the PS2 version of the 1988 release of Galaxy Force, and used that to recreate the Moving Cabinet’s movement in-game.

For the motor movement sounds, we ended up having to use the DX sounds for the Super DX version as well. Just like with Space Harrier, we opened the machine up, turned off the loud fans, and covered everything with cushions to block out all the other sounds in the room. Every time it turns into a real endeavor.

– I see. But now that you’ve come so far with Galaxy Force II, I’m sure that from the players’ point of view, there are people thinking “Since they managed to port GF2, shouldn’t they be able to bring back earlier games?”  “Surely they’ll port this game, or that game.” What do you say to that?

YO: We were able to port GF2 because we had experience building the PS2 version, but that doesn’t mean that any game on the X or Y-boards is a piece of cake.

NH: If we were to port another one, we’d have to go back and analyze the code from square one. Though of course we could leverage our previous experience.

YO: It would also take a lot of time. But hey, if we did, I’d want to port the best version of the game for porting, even if that takes awhile. When we announced 3D Galaxy Force II, it was a little disappointing that people thought it would be the MegaDrive version. Since we are choosing the best assets on which to build the 3D versions, it doesn’t necessarily mean we’ll use the MegaDrive version. For Altered Beast, we chose the MegaDrive version because it had multi-layered backgrounds, which we made 3D, and it let us add in “Random Form” mode. Even if the MegaDrive version would have run, it wouldn’t have been wide screen compatible, and there would have been other minus points.

NH: I guess the subtext of this is that you want us to add scaling features to the GigaDrive.

YO: I wouldn’t go that far. (laughs) I’m just trying to be completely open with Game Watch here. This interview is getting pretty long, so people will probably forget what I said afterwards. (both laugh)

– Oh, no no. I’m quite committed to these interviews. Every time I interview you guys and go back to write the article, I re-read previous articles to make sure I’m not letting anything slip by. Because of that, they do generally get longer and a bit sprawling, so yeah I’m sorry about that.

I was left with the strong impression that the GigaDrive concept was going to be a core element of any MegaDrive ports that followed after Sonic. So when I heard GF2 was coming out, I was inclined to think that you were working on the MegaDrive version.  I think everyone got the most hyped when the article discussing the GigaDrive came out.

NH: I get hyped as well, and there are new titles coming down the pipe for the GigaDrive. Lots of games that are totally different once put into 3D. When I hear people getting so excited about things like the GigaDrive, it reminds me how many people there are out there who shared that era of gaming with me.

– The word “GigaDrive” itself turned out to be even more of a key word than I imagined it would.

NH: You haven’t seen the GigaDrive in full form yet. It’s been evolving across Sonic, Altered Beast, and Ecco. Just you wait and see.

– On that note, you could say that the peak of the arcade-based ports in the series, both difficulty-wise and in terms of the 3D implementation, is 3D Galaxy Force II, correct? Meaning that the Gigadrive’s returns have been huge.

NH: Not just yet. You won’t be saying that once Thunder Blade is finished.

– (laughs)

YO: GF2 was released in 1988, the same year as the MegaDrive itself, so it’s been twenty five years. The PS2 version was released six years ago in 2007, but you could say that GF2 has finally been completed after twenty five years. It’s not quite the Sagrada Familia, but Gaudi didn’t build that all by himself, he had his disciples pick up the work. There was the arcade version, then the PS2 version, and now you can see its completed form in the 3DS version.

NH: For me, it would be complete if I could see it on a big screen.

YO: For me, the 3DS offers the best environment for immersion.

NH: Yeah, you can also take it with you on the road as well.

YO: I think the 3DS XL is the best hardware to play the game on as well, in terms of sprite resolution. If we put it on a bigger screen, we’d have to increase sprite resolution and density, and it would slowly move away from the original arcade version. We’d need to make a lot of adjustments.

– That is how things would have to go, for sure.

YO: Neither M2 or I have any idea what kind of GF2 we could make five or ten years from now. (laughs)

NH: There are a lot of potential approaches, like increasing the amount of depth in the backgrounds and whatnot.

– It’s impressive to see how powerful these “into the screen” scrolling games are when they’re remade in 3D. Thank you again for your time!

3D Galaxy Force II

We snuck into M2’s development floor, which is wide open and easy to navigate. This is where ports and original titles are built!

3D Galaxy Force II

This is Matsuoka-san’s desk, the director for the 3D Remaster Series. The design document on-screen outlines Game Pad Pro compatibility.


Copyright ©2013 Impress Watch Corporation, an Impress Group company. All rights reserved.

[1] 3D Galaxy Force II uses streaming for its music, and emulation for its sound effects.

[2] The R-360 was a fully rotational arcade cabinet built by SEGA.

[3] Virtual On has separate monitors that display the in-game action, so bystanders don’t have to watch the actual players to see the action.

[4] A ryokan is a Japanese-style inn.


SEGA 3D Classics – 3D Ecco the Dolphin Interview with Developer M2

3D Ecco the Dolphin

It’s our third week of SEGA 3D Classics, we hope everyone has enjoyed these interviews, and more importantly enjoyed all the great games. We’re continuing this week with Ecco the Dolphin! Some interesting details inside that I won’t spoil in the intro, do read and don’t forget to drop a comment in if you enjoy the article!

Thanks again to Game Watch and Impress, Okunari-san, and Horii-san for their involvement in making these interviews available to our western audience. Thanks to Siliconera for coordinating with us to help spread the word to SEGA fans across the web. And special thanks to our producer Sam for translating these interviews for everyone’s enjoyment.


3D Ecco the Dolphin

From the left, Naoki Horii, M2 President, Ryoichi Hasegawa, Original Localization Director, Yousuke Okunari, SEGA CS3 Producer

Super Dolphin Mode included to get you all the way through the game!

Yousuke Okunari: So straight away, I’ve brought 3D Ecco the Dolphin today, hot off the presses. Care to give it a try? I recommend “Super Dolphin Mode”, as you’re invincible and don’t need oxygen.

Naoki Horii: I agree, the original game was quite difficult to clear, so Super Dolphin Mode is a good place to start.

3D Ecco the Dolphin

– Hmm. It does feel different now that it’s in stereoscopic 3D, doesn’t it? But that’s not just because of the 3D, right? There’s… There’s something else. The game looks different.

YO: Do you remember the first time you played a MegaDrive game? Seeing the two-layer scrolling backgrounds and thinking how impressive that was? Like when you’re playing Alex Kidd and the Enchanted Castle and you see that two-layer background and say to yourself, “This is awesome!” Seeing stereoscopic 3D on the 3DS is really close to the feeling of technology advancing I had when I saw multi-layer scrolling for the first time.

NH: I think it’s probably a similar feeling.

– I’m really impressed with how the water looks. It just seems unreal.  The graphics are the same as they ever were, but with 3D Sonic the Hedgehog as well, I remember thinking the sky just looked beautiful.

NH: That’s because you can really feel the space and depth within the game world.

YO: Moving through the labyrinths feels kind of like looking at an ant colony from the side.  If you use the Super Dolphin Mode, you can explore at your leisure without worrying about time limits. But we didn’t just dumb down the difficulty. Even though you’re invincible, all the puzzles are still the same. It’s just that now you can take your time while you figure them out.

– The raster scrolling is gorgeous! (Continues to play)

YO: The MegaDrive always had some really pretty scrolling features, and that’s why I think this looks and feels as nice as it does.

– Wow that was a lot of fun. (Ryoichi Hasegawa enters the room)

Ryoichi Hasegawa: Hey guys!

Ryoichi Hasegawa
Mr. Hasegawa has had two tours of duty at SEGA, spanning 1992 to 1998, and then 2007 to 2012. He is currently employed at CROOZ, Inc., a company that develops social apps, as a game designer and localization specialist.

After being hired at SEGA, he was assigned to a liaison group that managed domestic and internationally developed 3rd party titles. The first game he was responsible for was Ecco the Dolphin. He considers the Japanese release of this title one of his biggest achievements during his time at SEGA. (as a side note, his personal favorite second biggest accomplishment was during his time working on Burning Rangers. He also was in charge of writing English-y lyrics for the theme song, Angels With Burning Hearts, he hid a small Easter Egg where the first letter of each word in the line “Sight of night I cheer to embrace a magic” read together form a message.)

YO: We have a guest today, someone who was involved in the development of the original version. So let’s have him play it as well while we talk.

RH: (Already holding the game) Wow! The title letters are popping out of the screen! This is cool! Ooh, the surface of the water has depth now, and it feels like Ecco is poking his head up out of it. I’ve never paid attention to the water surface like this before. You can really see the depth when you jump. This feels great! … Ok, so what’s “Super Dolphin Mode”?

YO: Super Dolphin Mode is a super invincibility mode we included in the port so that anyone can pick up and play. (laughs)

RH: The sparking effect around him to show he’s invincible really looks like it’s moving around him. My DIY font is still there, I see. (laughs) Back when we were working on it there was no such thing as true type font, I used Ichitaro[1] to make a handmade font dot by dot, and the developer added color gradation to it. I still think it looks weird. (laughs)

YO: Not only is Hasegawa-san one of the (original) developers, but he’s also one of Ecco’s biggest fans, so we’re really honored to be able to show him the 3D version.

– Alright, so the 5th game in the series is Ecco, and once again I think you’ve probably surprised a lot of people with this one.

YO: When we went through and start picking out popular MegaDrive titles, we inevitably wound up concentrating on 2D side-scrollers. For arcade titles, we focused on 3D games, but for MegaDrive games, we wanted to do side-scrollers. So that led us to make 3D Sonic, followed by 3D Altered Beast, but we also had an underlying theme in our mind for the 3D Remaster Project: “Getting people to challenge the game one more time”. Giving the gameplay a totally new feel by implementing stereoscopic 3D was a given, but we can also wanted to lower the difficulty a bit, something we saw the value of with 3D Space Harrier.

That said, Ecco is a game that’s widely known for its high difficulty. We thought, “If we lower the difficulty a bit, hopefully people will give it another try and get to the end of the game this time.”

NH: We figured that there aren’t that many people out there who have played this game to the end. In that sense, changing that situation is one of the reasons behind selecting Ecco.

YO: Ecco is a particularly notable title in the MegaDrive library due to its stunning visuals and just how good it feels when you’re moving around. The water graphics pop so well, and we just really wanted to see it in 3D. On the other hand, and I don’t mean any offense to Hasegawa-san here, but not a lot of people got to the end of the game. I think the feeling of just swimming around the first stage tends to satisfy people, but there’s a really amazing story that unfolds through the second half of the game. It takes some really crazy turns, which I think few have experienced.

NH: I definitely want people to enjoy the story.

YO: The whole concept of the 3D Remaster Project is based on two points: take what made the original great and bring that into 3D, while lowering the barriers to entry. So for 3D Ecco, the first thing we did to reduce the difficulty was removing Ecco’s biggest weakness: His need to breathe. We basically made him a fish.

The original game had a cheat code where you could access a “Debug Mode” and give yourself unlimited life, which meant you could run into enemies and not take any damage. With “Super Dolphin Mode” we take it one step further, and it’s basically the same thing as having an invincibility item all the time. So when Ecco runs into enemies or obstacles, they’re defeated or the obstacles break. So people can now focus on solving the puzzles and whatnot.

All the puzzles are still there untouched, like the cliff you can’t break until you run into all the shells, or the water current at the ocean floor you can’t dive through unless you use the boulder. You still need to do all that. If you made two or three mistakes while trying to do these puzzles in the original version, you’d run out of oxygen and die. That’s all gone now.

NH: People can now play the game as an action puzzler. Our goal was for people who have the game in their backlog for the past 20 years to see the improvements and finally get around to enjoying it.

RH: (still playing) Hmmm, yeah, now that you mention it, this puzzle where you guide the starfish with the sound waves would be too difficult for people these days because of the air limit. I think the decision to put in Super Dolphin Mode was a wise one.

YO: I want people to enjoy Ecco as an adventure game as well. Nowadays, you can see a video of the ending online, so I think there’s probably people out there who have seen it. But how many people have really beaten the game? My hope is that people will want to try to beat the game and see the ending themselves.

NH: You can also keep going on the same game too if you’re using the Save/Load feature. Incidentally, how many copies did the MegaDrive version sell in Japan?

RH: I seem to recall it being around 70,000 units or so.

NH: If that’s the case, the number of people who’ve cleared it are probably in the thousands, I’d guess.  It’s possible a lot of people walked away from it just thinking, “Wee! Swimming in the ocean is cool!”

– I’m one of those players that ended with “Wee! The ocean in this game is cool!”

RH: But, you know how it was back then. You’d buy a game and play it to death until you beat it, especially if you are SEGA fan, right? So I’m sure the number of people who cleared it isn’t in the hundreds range. Still, I don’t think it’s in the tens of thousands either…

NH: I gave up halfway through myself.

YO: In any case, the hardest thing about Ecco‘s was running out of oxygen.

ALL: Yep, yep.

YO: With the air limit removed, it’s wonderful to just move around all you want. Everyone should try it out.

– And that’s what the 3D Remaster Project is for. You didn’t put this much work into it when the game was on Virtual Console, right?

YO: Well, the concept behind Virtual Console is to provide games as they were. There may be some situations where we want to add more or take something out, but we can’t. For the SEGA AGES ONLINE[2] series we released last year, we were able to add in new ways to play with the idea of getting to people to compete, i.e. features like score attack which encourage people to master the game, but we didn’t do anything to the basic gameplay other than add save states.

For the 3D Remaster Project we’re working on now, we’re putting these games onto handhelds, which means that people will be using different controllers compared to the originals, and they’ll need to be able to play them in trains and other places, so the idea was to maintain the game’s original fun factor while bringing down the difficulty level. Even for 3D Sonic, we hear there are people who reload their save states over and over and have finally cleared the game for the first time. They play a bit, then immediately save, and by doing that over and over can clear the game. Since we’ve made Ecco easier as well, I’m hoping people will play it in a similar way. All while stopping to take in the gorgeous backgrounds.

3D Ecco the Dolphin

The octopus graphics that Hasegawa-san praises is shown above. With Ecco’s emphasis on blues, the octopus is one of the game’s characters that really stands out with its color combinations. When he was first assigned to the project and saw it for the first time he was so impressed with the graphic, he sent a fax praising how awesome it was that said “As a Japanese person, it looks deliciously realistic!”

RH: (Still playing) You’ve got the animated bubbles from the water currents and the coral here in front all done up in 3D, huh. It’s not quite as in-your-face as it was for 3D Space Harrier or 3D Super Hang-on, but you really feel like you’re swimming through caves filled with seawater. And the octopus graphics still look as awesome as they always did.

– (Laughs)

YO: How awesome the octopus graphics look has nothing to do with the 3D though. (laughs) Wait, what!? You’re already at the octopus!?

A custom map editor created specifically for Ecco’s 3D.

YO: We think we managed to take care of lowering the difficulty pretty well, but similar to the previous games, when we first put the stereoscopic 3D in, it wasn’t all that great. (laughs)

NH: Yeah, it was similar to what we saw with 3D Sonic, but when we showed off the first ROM, it was bland enough that we thought SEGA might ask us to stop working on it.

YO: We touched on this in the 3D Sonic interview, but we added stereoscopic 3D by making the MegaDrive’s scrolling into multilayer raster scrolling to give the impression of depth. When we started on Ecco I thought, “Hey, this is pretty good,” but after getting a little bit further in and playing the ocean floor maze, the feeling of depth just vanished.

NH: Because there are parts of that area that have only one background layer.

YO: Since it’s a maze where a collision layer was placed over a single background layer, this part of the game reverted back into normal 2D Ecco. On top of that, it bothered me that half of the stage didn’t have any two-layer scrolling at all, so there was no sense of depth. I started thinking that doing a 3D conversion wasn’t going to be possible. Since the problem was too large on its own, we decided to push the development of 3D Sonic ahead of Ecco (Note: 3D Sonic and 3D Ecco had overlapping development schedules).

NH: Around the same time, one of our programmers started adding in 3D by directly messing with the binary itself. All by hand. And it was looked pretty good, too. Each stage is some fifty screens large, so having a programmer sit down with a designer and go through them all to do everything by hand was out of the question. Since we had no other choice, we decided that we should build a dedicated map editor, one that a designer could also use to a certain extent, so that we could add depth to 3D Ecco.

RH: Now that’s dedication!

NH: The end product would have been ‘meh’ if we hadn’t.

– (Laughs) Dedicated Ecco the Dolphin game dev, huh?

NH: The approach changes with every game, you know?

RH: Does that mean you could go and make new maps for an Ecco v1.4 or v1.6?

 ALL: (laughs)

NH: Well, we probably could, but we’d have to go through all the trouble of modifying the maps themselves. (laughs) …but anyways. We wound up building the 3D map editor, Okunari-san gave us the nod to proceed and thus we were able to give the game a 3D feel.

– But even using the editor, don’t you still have to add depth settings by hand?

NH: Yes you do. For 3D Altered Beast, there were five stages and the scroll speed was slow, so there weren’t that many screens. So we managed to add depth to them. We also had an editor of sorts for 3D Altered Beast, but since everything moves so fast in Ecco, the maps are really big, and there are a lot of them. There were also places we had to put into 3D throughout the game. Even with the editor, our designer was dying.

YO: One stage in Ecco is bigger than all Altered Beast’s stages combined together.

NH: You speak the truth. (both laugh)

RH: That’s awesome.

– It’s true though. In the strategy guides of yore, they used to have to take individual pictures of screens and lay them all out. I remember that shooting games with high-speed scrolling had really long stages.

YO: By the time the MegaDrive came around, the use of illustrations rather than photos was on the rise for magazine maps. There was just too much to deal with.

– So you went in and added depth by hand to all these backgrounds.

NH: Well for the first stage, our designer was all fired up about it and did about 50 screens in a single night. And I started thinking, “maybe we can really put Ecco in 3D,” but you can’t expect that pace to go on for 5 days, or 10 days, you know?

– The maze parts just keep coming I suppose.

YO: Ecco does have a lot stages after all, so it was a slog, but once you start on something like this, you have to see it through to the end. You can’t back out. When we were working on 3D Sonic, we approached the game thinking, “we should add 3D to any of the game’s visuals that already have design depth,” or, “let’s add 3D everywhere there’s raster scrolling.” Yet for 3D Altered Beast, there were spots where we had no choice but to go in and add 3D by hand, like Stage 3. And Ecco was like that pretty much like that for half the game. So while I feel like the quality of our 3D implementation increases with every title, so does the amount of work we have to put into them.

NH: It’s like being buried in a really fancy coffin. When we picked out all the titles to port from the MegaDrive to the GigaDrive (refer to the article on 3D Sonic the Hedgehog for details on the GigaDrive), we made sure to choose ones that our staff wouldn’t have to die to finish, but Ecco left us in a predicament. Games like Gunstar Heroes, which lots of people ask for and I myself would love to do, would never see the light of day if we had to develop them under the circumstances in which we developed 3D Ecco. It’s not that we don’t know how we’d go about it at this point, but at the time we were making these decisions, it was completely off limits. We knew we needed to get much better at the basics first before something like that was even possible.

YO: Currently we have no plans for porting Gunstar, but it looks like Horii-san just thought up kind of plan for a 3D implementation, so if the MegaDrive series goes well, who knows?

3D Ecco the Dolphin

The 3D version of Ecco comes complete with both the International (Original) and Japanese versions.

Development Woes Due to Differences between the Original and Japanese versions.

YO: In any case, we were able to move forward with production thanks to the level editor. But just when we were able to see the end of the work on the horizon, another big problem cropped up: differences in the ROM versions. The thing is, we slipped in both the Japanese and international versions for all the games in the GigaDrive series. This was the case for both 3D Sonic and 3D Altered Beast. But for Ecco, the actual content of the Japanese and original international versions is completely different. So one day, M2 contacts me and says, “Um, you know, these ROMs are different,” to which I responded, “Well, yeah. Didn’t you know that?”

NH: If we’d known that when we were picking out games, we probably would have pulled Ecco from the lineup. (laughs) That’s how different they are.

YO: In other words, we thought we were about to cross the finish line, but it was just the turnaround point.

NH: Given that we already had experience porting the game at that point, we thought we could probably work more efficiently, but there was still a long way to run.

– Huh. So since the games had different content, even if the map was the same, you’d still have to go back and add in the depth information all over again.

YO: The programming itself was actually a lot different than we imagined.

NH: We weren’t able to just take the data we’d done so far, drop that in, and touch it up. But I guess it’s is like when you lose all your work because you forgot to save, and then have to redo it all from scratch. You tend to move faster the second time for some reason. (laughs) It was kind of funny, looking back at it.

YO: Since M2 was working on the original and Japanese versions alternately, it was hard to determine if the differences in game specs were bugs or what. So right when we were stressing out over it, I went and paid a visit to Hasegawa-san here.

– (laughs)

RH: He sent me a question via Facebook message, and I was like “What the-”

ALL: (laughs)

RH: At that point in time, I’d already left SEGA and was working for a different company. That’s how serious these guys were.

NH: But hey, the best way to find out the differences between the international and Japanese versions is to ask someone who actually knows, right?

YO: And you know, while the 3D Remaster Project was my project proposal, at the time Hasegawa-san was my manager, and he was the one who actually circulated it for internal approval after all.

ALL: (big laugh)

RH: It’s not like I had no idea the project was going on, you know? I thought “Oh ok, they’re doing Ecco, huh?”

YO: So that’s how I had my former supervisor transform himself into a living game design doc. Alright, Hasegawa-san, I think it’s your turn to talk, don’t you?

RH: Sure. Let me start by saying I don’t have a lot of them but I still have some of the faxes about the game from back then, because this was in the MegaDrive days when there was no email. All the communication with developers happened over fax. So I went and dug out my own copy of the game, and tried playing both of them side by side. I looked for differences, listed them up and sent them over to Okunari-san. Then he would check to see if the differences were bugs or not.

– Wow, Hasegawa-san! You must be good at holding onto things! (laughs)

YO: This “treasure map” put us back on the right track, and with his help, discovering differences between versions was easy. And there were quite a few differences.

NH: So Ecco’s localization must have been particularly memorable for you, then… It seems like it left an impression.

RH: Well, it was the first project I worked on after joining SEGA.

NH: If you hadn’t been there for us, 3D Ecco might not have made it as the 3rd MegaDrive title in the 3D Remaster Project.

YO: I know that when Hasegawa-san was localizing the English version into Japanese, he added some drama and flare to the Japanese translations of some of the staler in-game messages. But that’s just changing how the messages are worded, right? I had no idea that the difficulty and the way the game looks also changed during the localization work.

RH: I played a ton of games back when they first asked me to take charge of Ecco in the MegaDrive days. Despite that Ecco was a still considerably challenging game, even for me. I didn’t feel it would be appropriate to release (a Western version of) the game as-is, so I had the developer cut down the number of enemies, add in a few air points etc. You know, tweak things in here as much as I could.

Ecco’s developer was a Hungary-based company called Novotrade, and there were things that they could and couldn’t do. For example, I’d say things like, “This section is really hard, so let’s get rid of it” But they would reply, “There are internal flags that rely on it, so we can’t.” On the other hand, for the original English version, the text screens that appear when you talk to orcas and other dolphins can have limited amount of text, and they expanded that for Japanese at my request. So we were able to insert lots of hint-like features into the game text which really helped.

YO: Here are some examples of the differences between the original and the Japanese version:

* A dolphin call will play when the SEGA logo is displayed in the Japanese version.

* When you pause the game, the Japanese version shows PAUSE text on screen and the music stops.

* The Japanese version has more checkpoints. In the original version, if you lose a life, you have to start back at the start of the stage. The Japanese version lets you start halfway through.

* Places where you can lose objects you have to carry are different. In the original version, if you move the screen past an object, it will immediately return to its original position. But in the Japanese version, it won’t immediately reset even if you move away by a screen or so.

… etc, etc…

YO: So in this way, there wound up being some intricate adjustments to the game balance.

NH: I think (Japanese) players who cleared the Japanese version of Ecco should give the overseas version a shot.

YO: Also, and similar to the situation we had 3D Super Hang-on, there was an issue where our QA staff couldn’t clear the overseas version for a while.

RH: I can recall almost crying when I cleared the English version back then.

– How much time did you have to do all these localization and difficulty adjustments at the time?

RH: Not a lot, actually. If we had more time, there’s probably a lot more we could have done. We probably didn’t even get to spend one month’s time on the difficulty tweaking.

– And during that time, you had to get your head around the game spec in general, decide what to improve, build a plan, then check the implementation…

RH: And all that was done over fax.

–  (laughs) Of course.

RH: Everyday, I’d type out text with Ichitaro, print it out, and then fax it over. But it was my first job so I was really into it. There was a time difference as well, and the peak time over at the developer was around 10pm in Japan, so I slept over at the office quite a few times. Back then, working late and sleeping at work felt like a responsible adult kind of thing to do. (laughs)

NH: I’m rather jealous that your very first job was swimming through Ecco’s beautiful ocean.

RH: When I saw those graphics, it sent a shiver down my spine. I was playing it on a company-issued TerraDrive[3], and it looked gorgeous on the RGB monitor. Rumors of it spread not only through our CS (Consumer Software, console development) group but also over to our AM (Amusement Machine, arcade development) group, to the point that I had graphic artists coming over from AM to our office asking, “Hey, I heard you’ve got some amazing looking dolphin game.” I’d say, “Yes, right over here gentlemen,” as if I’d made it myself. I can remember saying with all the confidence in the world, “The blues turns darker and then change to deep blue as you dive deeper and deeper to the ocean floor.”

ALL: (laugh)

NH: As we familiarized ourselves with Ecco, we came to see how much care was taken when the game was created.

RH: You know, one of the developer’s graphic artists once told me that when it came to the colors the MegaDrive could use, a lot of room was assigned to shades of blue, but the other colors didn’t have much gradation. There was some for reds and oranges, but most were allocated for blue.

3D Ecco the Dolphin

A characteristic of Ecco is its color choices, with particular attention given to blue variants.

NH:Yeah there are just a few accent colors for the reds and oranges.

RH: The gradation for shades of blue is amazing. I think they really made a great call back then to focus on those colors. Oh, by the way, I actually brought the original release’s European limited edition with me. The game came with a T-shirt, a music cassette tape (featuring U2 and Erasure), as well as a letter of endorsement from the Whale and Dolphin Conservation Society.

Meanwhile, one of the most obvious differences from the Japanese version is the package art. On the overseas version, he looks like he’s jacked up on steroids. He’s all muscly. It has some of the original ads in it as well, but if you open the flyer here from the Whale and Dolphin Society, you’ll see there are some pretty… visually explicit pictures of (violence towards) dolphins here. It seems like they mistakenly thought that the game was about world peace and loving dolphins so they gave it a letter of endorsement. This was a package created to memorialize that endorsement. I think they might have just played the first stage. They probably didn’t think you’d end up fighting aliens in the end. (laughs)


3D Ecco the Dolphin3D Ecco the Dolphin

3D Ecco the Dolphin

Limited Edition

3D Ecco the Dolphin3D Ecco the Dolphin

Comparing the Japanese and European versions

YO: But Ecco isn’t a game about a dolphin engaging in acts of brutality, it’s the story of a brave dolphin who saves his friends.

– You’ve got that right. (laughs)

3D Ecco the Dolphin

Later in the game you can slide across the ice! Be sure to play the whole game!

YO: Anyways! So, we added a lot a stereoscopic 3D to Ecco, especially at the DNA part in the second half of the game.

RH: Aww crap. I can’t get that far right now, so I’ll have to buy it after it releases and play to the end. (laughs)

NH: We really did everything we felt we could do this time, so I sincerely hope everyone plays to the end.

YO: Unfortunately we weren’t able to include a stage select feature for this game. Since it’s an adventure game, we want to make sure players are able to enjoy the story in the proper order. However, all the cheat codes and other features that were there in the original are still there, like the passwords. So you can still use your passwords, if you still have them written down somewhere. Or you can probably look them up on the net, too. (laughs) If you hit a stage that you simply just can’t clear, feel free to go ahead and use those cheats to move forward. Still, I hope that players take the time to enjoy the story in the order it’s intended.

– I know where you’re coming from.

YO: Also, we’ve left Ecco’s controls untouched, so they may take a little getting used to. 3D Ecco reminded me what it was like to get sore thumbs from a d-pad. Even from just playing around with the game a bit.

RH: That’s right. You end up really pushing the d-pad hard, don’t you?

NH: Everyone needs to experience that.

YO: Like when you jump over the waterside boulders, or speed up to burst out of the water in the prologue area, which is where you can practice some of the technical moves or what we’d call a tutorial these days. And that may be a bit of a barrier to entry for this game, but we left it as-is. So unlike 3D Sonic, just because you are diligent using the save feature doesn’t mean you’ll necessarily be able to clear the game.

– If you mess with the controls too much, it becomes a different game. I could see that if you start making adjustments to them, you might wind up never being able to release the game. (laughs) I think you’ve made good decisions on what to tweak and what to leave alone.

YO: The game requires you to make some really technical jumps from the mid-game on, but now you have a plenty of time to do it, and you can also save if you need to.

– Just the fact that you won’t drown now when you get lost is huge in my opinion.

NH: Yes, Super Dolphin Mode is a big game changer.

– Ah, it looks like our time is about up. Let me get a word about Ecco from each of you before we close.

RH: If I had to say one thing about Ecco it would be this: the small fish are delicious.[4] (laughs)

NH: I’d say,Ecco is a crazy game where really you should just be able to play around in a peaceful blue world, but all of a sudden, aliens!   We’ve really done our best to make this an experience that everyone can enjoy. I hope players pick it up.

YO: With this game’s 3D features, you can experience that feeling you first felt when you played Ecco twenty years ago. Now’s the time to take on the game again and get revenge on your 20 year backlog!

– Actually now that I think about it, you guys also announced 3D Galaxy Force II at the same time as 3D Ecco, didn’t you?

YO: Yes we started developing 3D Galaxy Force 11 after 3D Space Harrier and 3D Super Hang-on. It will be the third arcade port.

This game is one of the greatest SEGA arcade simulation games, and was a real challenge when we ported it to the PlayStation 2. I believe we had an interview back then as well, didn’t we? Well, it’s back! (laughs) Just to give you a simple comparison, the arcade versions of Space Harrier and Super Hang-on had two 68000 CPUs stack together, and were already at their very limit, whereas Galaxy Force II has three of them!

NH: At first we thought porting it to 3DS would impossible, but we’ve somehow managed to get the Y Board (Galaxy Force II’s system board) to draw 120 pictures a second. Chance of success? I can’t say it’s a certain victory, but we are definitely trying.

YO: Well, we’ve progressed to the point where we feel comfortable announcing the game. Our escape route is now blocked. While you’re waiting for the release, you can always practice up on the PS2 archive version of Galaxy Force II.

NH: Well, the road forward is blocked too, you know. But we’ll find a way to knock down the walls in front of us.

– I can’t wait! Thanks again for your time today!
Ecco the Dolphin was originally created by Ed Annunziata.
Copyright ©2013 Impress Watch Corporation, an Impress Group company. All rights reserved.


[1] Ichitaro is a widely used Japanese word processing software program, especially in the 90’s when Windows Japanese text support was lacking.

[2] Known as Sega Vintage Collection 3 overseas.

[3] The TerraDrive was a PC built in cooperation between SEGA and IBM Japan. It was basically a IBM PC with an integrated MegaDrive.

[4] Since Hasegawa-san was the original localizer, his translation of the line “Charge small fish to feed and gain strength” into simply “Small fish are delicious” (kozakana wa oishii) is a line he is particularly proud of, since Japanese people, including himself, tend to think small fish are delicious rather than just a symbol of regaining energy.


SEGA 3D Classics – 3D Altered Beast Interview with Developer M2

We continue our series of interviews with developer M2 regarding the SEGA 3D Classics for the Nintendo 3DS – Today’s interview is all about Altered Beast.  As with all of the articles, the Altered Beast interview has some pretty insightful info about the creation of these games onto the 3DS platform.

Thanks again to Game Watch and Impress, Okunari-san, and Horii-san for their involvement in making these interviews available to our western audience. Thanks to Siliconera for coordinating with us to help spread the word to SEGA fans across the web. And special thanks to our producer Sam for translating these interviews for everyone’s enjoyment.

As always, if you read and enjoy this interview, please take the time to post a comment and let us know!


Out of Nowhere: A Web Interview for 3DS’s 3D Altered Beast?

SEGA 3D Classics - Altered Beast

We hear about new parallax scroll effects not present in the original, the new “Random Form” option, as well as what else is in store for the 3D Remaster series!

Altered Beast
Altered Beast is an action game that was released for the MegaDrive on November 27, 1988 in Japan, and later overseas.

The story is based around two Greek warriors who have obtained the power of the beast from Zeus, and set forth to free the goddess Athena, who has been kidnapped by demons. The game can be played by two players simultaneously and was initially released in arcades. It was subsequently ported and released on the MegaDrive.

The player can obtain “Spirit Balls” by defeating two-headed wolves, which will cause him/her to transform through different body phases: Man, Giant Man, and then Super Man. Obtaining a Spirit Ball while in the Super Man form will transform the player into their titular Beast form.

The Beast you transform into depends on the stage you’re in. There is the Werewolf, powered by fire; the Were-dragon, king of the skies; the Were-bear, who can petrify its foes with its breath; and the Were-tiger, who can attack with vicious shockwaves. Transforming allows you to use a variety of new and more powerful attacks. These transformations are extremely important when facing stage bosses.

SEGA 3D Classics - Altered Beast

Altered Beast (arcade version) in the Sega Vintage Collection.

SEGA 3D Classics - Altered Beast

Wii Virtual Console (MegaDrive Version)

–  I know you guys are busy, but thanks again for taking some time with me to talk about 3D Altered Beast.

Yosuke Okunari (below, YO): Honestly, I didn’t think you’d take the time to do an interview just for Altered Beast. (laughs) I appreciate it.

–  Well, let’s get down to it! There’s an arcade version and a MegaDrive version of Altered Beast, and you’ve chosen to port the MegaDrive version for this project. Why is that?

YO: Well, we decided from the very beginning of this project that besides Sonic The Hedgehog, we wanted to port multiple games from the MegaDrive.

The project started two years ago (2011), and it took us more or less a year and a half to finish our first game, 3D Space Harrier. Once development for that game had progressed a bit, we started working on 3D Super Hang-on, which took just under a year. Despite the fact that these are both titles we’d worked on before, and were quite familiar with how they worked, development was pretty long.

Naoki Horii (below, NH): We had zero technical experience with the 3DS, and we needed time to remake these games to work well with the 3DS’ particularities. We also didn’t have a lot of engineers working on it, so it took a while to get the 120 frames per second for stereoscopic 3D working.

YO: That said, everything took far longer than we’d imagined. (laughs) If we kept going at that pace, our next title would have taken another year, which would’ve been very bad for the project. So we needed the MegaDrive games in the mix to stabilize the rate at which we could put out titles. When you port games from the same system, it lets you work more efficiently since you save time spent on analyzing the original hardware.

NH: If we were just porting a single game, sure we could probably get it working. But we figured that if we’re going to port something, we might as well do it in a way that lays a foundation for the next step. So we chose the path that offered the most opportunity down the road.

YO: When we looked at what games to port from the MegaDrive, we started with the games that were performing well on Wii Virtual Console, and from there narrowed down candidates based on popularity. One of those titles was Altered Beast. Maybe it’s because people find the bear really funny, I don’t know, but Altered Beast seems to be a pretty popular game!

–  Is it now? Actually yeah, after the game was announced, I saw that ‘the bear’ started trending on Twitter[1]. (laughs)

YO: Keep in mind that there’s an arcade version of Altered Beast, but unlike the arcade version, the MegaDrive version has two layer scrolling, and without those two layers, you really don’t have a foothold to start working on stereoscopic 3D. The arcade version basically doesn’t have any parallax scroll at all.

Another reason we chose the MegaDrive version of Altered Beast was the hidden feature in it where you can select which beast to transform into. Only the MegaDrive version let you choose which form to transform into on each stage.

Around the time the original game was released, there was a shortage of titles for MegaDrive users, so the ability to choose your beast form added a lot of replayability. When I used to play, I didn’t find choosing my transformation to be very fun, so I’d close my eyes and have my friend choose it for me. I wouldn’t know what beast I’d change into, and that added a lot of excitement to the experience. (laughs) I used to wish there was a way to do that automatically, so I had M2 add that in.

–  So that’s the SPECIAL feature this time: the “Random Form[2]”?

NH: We almost always overshoot our development cost estimates, but the “Random Form” was a miraculous feature that took far less time to implement than I thought it would. When you use it, you can really tell how certain beasts work better in certain stages. There are a lot of spots you’ll find you’re able to do something you never thought of before. Also, for tough spots in the game, our project director, Tsuyoshi Matsuoka, came up with the idea to let you use extra Spirit Balls to change form in a pinch. It took some time, but it was a lot of fun once we got it in. I’m really glad we included it. (laughs)

YO: ”Random Form” gives you a chance to come back if you happened to get to the boss in a form that’s not good for the fight. I think it really deepens the gameplay. (laughs) Like when you play single player, you’ll typically pick up three spirit balls and then arrive at the boss. So what I do is pick up only two spirit balls on the first “loop” of the stage, leave the third ball, and then when I got to the stage’s second “loop” part, I get two chances of getting the form I want at the boss. (laughs)

NH: Which means that if you get the wrong transform twice, it’s time to give up. (laughs) So it got us a pretty risky yet wonderful new feature. Debugging two-player co-up later on was a grind, but that’s a different discussion. Actually, we initially wanted to make it so that you can transform into different beasts when you’re playing two-player, but we only had so much time and weren’t able to get it to work in the end. That was a bummer.

YO: Since Spirit Balls drop everywhere in two-player, you’ll get situations where a player accidentally picks one up, you know? That causes both players to change into a new beast, where you’ll hear things like: “Why the hell did you pick up that Spirit Ball!? We were Weredragons, man!” It’s pretty fun. (laughs)

SEGA 3D Classics - Altered BeastSEGA 3D Classics - Altered Beast

Defeating the white two-headed dogs will earn you Spirit Balls that power up your character. Picking up another when you’re in the third power-up form will transform you into a beast.

SEGA 3D Classics - Altered BeastSEGA 3D Classics - Altered Beast

Two Player Co-op. Fighting the boss while transformed is a snap, but…

SEGA 3D Classics - Altered Beast

If you get to the boss in human form, it’s a much rougher ride.

SEGA 3D Classics - Altered BeastSEGA 3D Classics - Altered Beast
SEGA 3D Classics - Altered BeastSEGA 3D Classics - Altered Beast

Here, the player is transforming from the Weredragon to the Werebear with “Random Form”. The Weredragon can stay in the air, but as soon as he transforms into a Werebear, he falls to the ground.

–  (Laughs)

YO: So, the result is “Random Form” mode. Actually, a lot of discussion went into deciding the Japanese name. The original name was “Random Form” [as it is in the English version], but the director said he wanted to change it.

When the mode got implemented, the name had been changed to “Impulsive Transformation”. I was a bit irritated with it at first since it’s a little goofy, so I told them that it needed to be changed. I said I’d think up something better, but after playing the game for two or three days I sort of got used to it. So in our meeting the next, I said: “Yeah, I guess it’s fine. Let’s leave it like that.” (laughs)

NH: We argued a lot over the name. Here are just some samples of the names we came up with. Take a look.


Rejected names for “Impulsive Transformation”

“Chef’s Selection” Transformation “Roll the Dice” Transformation
Heart-racing Transformation Gamble Transformation
Lottery Transformation Shocking Transformation
Schrodinger’s Transformation Mysterious Transformation
Adlib Transformation Chaotic Transformation
Try your Luck Transformation Dark Transformation
Daily Special Transformation Miracle Transformation
Ambiguous Transformation Dream Transformation
Fuzzy Transformation Abnormal Transformation

(Some curve ball names)

Shuffle Beast Zeus’ Pranks
Beast Roulette Hentai[3]
Sudden Mutation


…and after an intense selection process, the surviving candidate was “Impulsive Transformation”.

–  Wow, so much work for a single name. And you had so many name ideas… (laughs)

YO: I haven’t heard all of these either, but I do remember rejecting most of them. (laughs)

Dividing single image backgrounds into raster layers, and adding stereoscopic 3D!?

– So, this has been on my mind me since we talked about it in our last interview. Can you talk about how the GigaDrive[4]-related components are included in 3D Altered Beast?

NH: We’ve made some pretty fundamental revisions to the GigaDrive at this point. Every time we try porting a new MegaDrive title, we gain insight into what kind of features and specifications we need for it, and we put more work into the 3D so that it works better with the Gigadrive, beyond what we had in previous iterations.

An example would be how we added support for vertical parallax scrolling, etc. How can I put this… Basically, the GigaDrive spec I showed to you guys last time was from its initial development stage. Once that was in play, our team members had lots of feedback about how it should function as we go forward. Maybe that’s how building real hardware works? Anyways, Altered Beast more or less uses the same v1.0 hardware draft that Sonic used. So it wasn’t so much the GigaDrive components, but more making the game itself work with the Gigadrive that we wound up focusing on.

YO: Originally, we intended to wrap up Altered Beast with a bit less effort, but once we finished 3D Sonic, there were a lot of things we wound up obsessing over. We started going out of their way to look for more spots we could squeeze more 3D in. (laughs)

SEGA 3D Classics - Altered Beast

NH: A lot of them were in these really ordinary but very detailed spots. Like how we wound up adding 3D to stage 3 when that wasn’t in the original plan.

YO: Some of these 3D touches would be hard on the eyes, so we’d have the designer toss the changes out and revert back to the original. We also made the sky in the last stage 3D, right?

SEGA 3D Classics - Altered Beast

NH: That was probably the most extreme fix for this game. In the original game, the sky was a single graphic. But it was just screaming to be broken up and raster scrolled. And so we fed it to the GigaDrive’s stereoscopic 3D. Now the original MegaDrive version we’ve made uses parallax raster scrolling as well. Too bad there’s no way to show it to people though. (laughs)

YO: Multi-layer scrolling effects were added when the arcade version was ported to the MegaDrive, and when we ported this version to the GigaDrive, we wound up adding even more. (laughs)

I’d also like to talk about some of the touch ups we’ve done to the sound reproduction. The sound artist Manabu Namiki joined M2 during the course of the 3D Remaster Project, and thanks to him, the sound reproduction quality for this series is even better than some of the titles M2 has worked on previously. Namiki-san had previously worked on sound drivers for the PlayStation 2 SEGA AGES 2500 series as an external contractor. But he’s been carefully supervising things for us now that he works at M2 as a sound director. From what I hear, he put a lot of effort into Altered Beast in particular.

NH: Namiki-san records music and sounds from the original hardware, and then compares it to the waveforms outputted from the 3DS. He looks for reasons things sound different, sees if there’s a way to fix it, and then tries to figure out if the fix in question is possible within the processing restraints of the 3DS. It’d be great if that was all there was to it, but the programmer who works on the sound driver has other important things he has to do for the other 3D projects. Like implementing HAYA OH in 3D Space Harrier (bonus content yes, but very important).

Still, despite how intensely busy the other 3D projects are, Namiki-san will still issue manifestos. Things like, “Where’s Altered Beast’s bass, damnit!?” I hope everyone gives the final result a listen.

YO: Given that Altered Beast was one of the first MegaDrive titles and it’s already being handled with this much care, we think Namiki-san will have a very positive impact on future titles.

The benefits of the local play feature
The next title up is a MegaDrive title, and also the most challenging one yet?!

–  So, this is going to be the first game in the 3D Remaster Project series that you can play two-player, correct?

YO: That’s right. It supports simultaneous two-player over local wi-fi. Really though, since this was in the original, it had to go in.

NH: You say that so casually.

YO: Actually I wasn’t sure if 2P co-op was something we would be able to do. I said to Horii-san, like I always do, “hey, since we had co-op in the Game Gear VC version, you can implement it in this version, right? Just do what you did last time.” Of course, that was not the case.

NH: Not only was it not easy when we did it on VC, but this time we’re running the game on a virtual machine with processing-intensive architecture.

YO: People who have played the local multiplayer in the VC Game Gear version are probably aware of this, but local multiplayer actually pushed right up against our memory limits, and because of that we had to limit some of the graphics functionality.

For example, the frame around the image we implemented for the VC Game Gear version wasn’t 3D-compatible. Since we have to sync the game on two separate systems, both games have to have the exact same settings, and when you add stereoscopic 3D to that, it’s not going to run at full speed.

NH: That said, of course we included 3D support for 3D Altered Beast local multiplayer. I say “Of course!”, but like I mentioned, it wasn’t something that we got up and running easily. (laughs)

–  When we talked for the 3D Sonic interview, you said that when you brought games you’ve ported to the GigaDrive to the 3DS, the processing already was near the memory limit. How did you find the room to support local multiplayer?

YO: From the outset, Horii-san told me “I want to include local multiplayer in the game in some way, but let’s move the game to the rear of the release schedule”, and “Is it OK if it only runs at 30 frames per second in 2P mode?”

NH: I did.

YO: That’s because it was a GigaDrive title, right?

NH: Well, that’s not necessarily the reason. We built the GigaDrive so it could easily run MegaDrive games in 3D, but of course it doesn’t run lighter or faster than the MegaDrive did. Improving the performance just comes down to elbow grease. Basically, hard work (read: optimization).

–  So the 3rd and 4th titles in the 3D Remaster Project are both MegaDrive games. What’s next for you guys?

YO: The next game is a MegaDrive title, too. Of course we’re working on some arcade games at the same time, but our next project has been a particularly challenging one.

NH: We’re having an unbelievably hard time with this title.  The programmer who easily got Space Harrier and Super Hang-on working on the 3DS for had to call in an assistant just for graphic optimization… I don’t want to hype it up too much, so please wait for more info about it.

YO: In any case, we don’t want to have too much time between now and the next release. However, it’s still under development, so I can’t make any guarantees.

NH: Really at this point, we should be able to release ports one after another, but the 3D in 3D Sonic worked out so well that we wound up tweaking the GigaDrive’s 3D constantly for this next title. As a result, we’ve really invested ourselves, and it’s a bit too late to back out now.

YO: I think we’ve taken care of more than half the 3D effects for the next title at this point? Every week, more 3D touches get added. Keep an eye out for it.

– So it sounds like you aren’t going to stop at four titles like the fans seemed to be expecting. Personally, I want to see the 3D Remaster Project go on as long as it can.

YO: No one over here ever said anything about four titles. (laughs) Still, since people seem to expect the releases in batches of four, that made the process of getting these first four done pretty special. Thanks everyone.

Some of you might know this if you’ve been following these interviews, and others might not, but I want to reiterate that the reason we’ve been able to release titles at this clip is because they’ve been in development for two years. At any rate, it takes us about a year to develop a single title. (laughs) We were really happy that our first game, 3D Space Harrier, was so well-received and with everyone’s support, we hope we can keep porting.

Plus, if we get even more positive feedback, we’ll be able to use the knowledge base we’ve built up with the 3D conversions, and attempt even bigger projects. So we hope for your continued support.

NH: Titles we never thought would run on 3DS are now out in the wild. If we can keep this up, I think people will be pleasantly surprised with what we can do. I hope we can show you more in the near future.

– Hmmmm, OK well you’ve got my support. I look forward to dropping by and speaking with you in the future if there’s an opportunity. Thank you very much!


Copyright ©2013 Impress Watch Corporation, an Impress Group company. All rights reserved.


[1] For about a month after 3D Altered Beast’s announcement, many Japanese game fans changed their Twitter icon’s background to the flame effect shown when transforming in Altered Beast.

[2] kimagure henshin, lit. ‘Impulsive Transformation’, in the Japanese version.

[3] Despite the common English usage, hentai has a couple of synonyms in Japanese, one of which means “to change form”.

[4] “GigaDrive” is the name M2 gives to the virtual hardware they’ve created through emulation. It’s essentially an improved MegaDrive that supports stereoscopic 3D.


SEGA 3D Classics – 3D Sonic the Hedgehog Interview with Developer M2

We’re back with more interviews from the ongoing series of SEGA 3D Classic interviews! This week touches on the challenges of creating a game like Sonic the Hedgehog in 3D, it’s quite the read and filled with a lot of technical details in crafting the game. As you’ve likely seen in our series, the M2 developers really put a lot of passion behind creating these games and making them as perfect as can be.

Thanks again to Game Watch and Impress, Okunari-san, and Horii-san for their involvement in making these interviews available to our western audience. Thanks to Siliconera for coordinating with us to help spread the word to SEGA fans across the web. And special thanks to our producer Sam for translating these interviews for everyone’s enjoyment.

If you read and enjoy this interview, please take the time to post a comment and let us know!

The hard road from porting the MegaDrive version, to full 3D-ification on the 3DS! How’d they do that!?

3D Sonic the Hedgehog
Pictured: Naoki Horii, President, M2 (left), Yosuke Okunari, Producer, SEGA CS3 (right)

–  Thanks for having me over again!

Yousuke Okunari (below, YO): So far with the 3D Remaster Project, we’ve put out Space Harrier and Super Hang-on. People might have been looking forward to another arcade cabinet game port, but our next release is actually a stereoscopic 3D adaptation of Sonic The Hedgehog.

As we discussed in our previous interviews, our previous two releases were games where the player “scrolls into the screen”, something easy for anyone to imagine in 3D. But for the next game, we wanted to put out a game that people wouldn’t expect to see in 3D. With that in mind, we considered multiple titles and in the end we chose Sonic’s debut game, because there’s nothing more SEGA than that.

Still, it took us awhile to settle on Sonic. First, as you may know if you’ve been following the interviews, there was quite a bit of time between when the 3D Remaster Project first started and when 3D Space Harrier was released. This put us essentially around the time when development had just started on Sonic Generations, which later released for the PS3/Xbox360. Generations included a completely 3D version of the Green Hill Zone stage which replicated the original very well and also included support for stereoscopic 3D.

So right then, there were some inevitable doubts about whether there was any point to re-making MegaDrive Sonic, and if a remake like that was needed. However, we came to the conclusion that “building something in 3D” and “taking something that was drawn in 2D and making it 3D” ultimately resulted in two different experiences, so we decided to move forward with a 3DS port.

Naoki Horii (below, NH): So when you asked us if there were any MegaDrive games we could remake in stereoscopic 3D, SEGA had already started development on Sonic Generations?

YO: That’s right.

NH: Interesting that Sonic survived the cut then.

YO: Once we’d decided to restore SEGA titles with stereoscopic 3D, I actually wanted to do some home console games as well. So when M2 and the North American and European SEGA staff decided on the lineup of games for the 3D Remaster series, which included Space Harrier and Super Hang-on, and removed Thunder Blade (laughs), Sonic was one of the titles on the list.

We started Game Gear development for Virtual Console at the same time that work on the 3D Remaster Project was going forward, and I was of course asking M2 about whether we could bring titles on SEGA hardware other than Game Gear to Virtual Console. When I talked to them about it, M2 told me “MegaDrive games probably won’t work out…” …And now, Sonic is up and running. (laughs)

NH: You’re leaving a lot of the story out. (laughs) The 3DS had a big change in architecture from the Nintendo DS and Gameboy Advanced; it uses a GPU that specializes in stereoscopic 3D. When you bring software from an era when games were composed of sprites and backgrounds into an emulator on the 3DS, you wind up doing a lot of work in a very roundabout way. And that offsets the performance gains you get with the CPU. That’s why I said “they probably won’t work out.”

YO: So from the outset I was hearing that MegaDrive games on the 3DS would be hard.

NH: The MegaDrive for instance has two background layers and four pallets (color definition tables).  Replicating that is the tough part.

Footnote: The Game Gear and the MegaDrive

Game Gear – CPU: Z80 CPU. VRAM: 16k bytes. Sprite Count: 64. Screen Resolution: 160×144 pixels. Sound synthesizer: 3 channel PSG, 1 channel for noise.

MegaDrive (Genesis in North America): CPU: MC68000 and Z80. VRAM: 64k bytes. Sprite Count: 80. Background Layers: 2. Screen Resolution: 256×224 pixels. Sound synthesizer: 6 channel FM Synth and 3 channel PSG, 1 channel for noise (one FM channel can be used for PCM)

Game Gear inherited its architecture from the Mark III and Master System, while the MegaDrive was basically a down-sized version of the arcade version of Space Harrier (single main CPU, able to display 2/3 the sprites compared to the arcade version, no scaling support)

YO: We had intended to get Game Gear games on Virtual Console from early on in the 3D Remaster Project, but I had to think over our approach for the MegaDrive titles, since we’d put them on the backburner after we were told that the games wouldn’t run on 3DS. One way was to use the ‘copy by eye’ method, where you rebuild the program from scratch but it looks exactly the same to the player. I figured M2 wouldn’t want to do it that way…but on the other hand, emulating the titles was going to be hard.

NH: I think the problem was that we didn’t have time to build a ‘copy by eye’ in the first place…

YO: Creating a ‘copy by eye’ does indeed take time. Not only do you need to do a complete analysis on the game from top to bottom to ensure that it’s accurately reproducing the original, testing takes ages because you have to make sure all the little hidden tricks in the game are in, and it’s easy to miss things that don’t run the same as the original.

NH: It’d be much quicker to make a Gradius ReBirth[1] than remake Gradius by eye. (both laugh)

YO: Anyways, since this is supposed to be a “Remaster” project, we were in a bit of a bind. Horii-san had said “the games won’t run”, however he came back and told me “but there’s a way to make them run.” The same thing happened when we started on the SEGA AGES 2500 series for PlayStation 2. The typical emulation methods didn’t work at first, but after a while we were able to get a MegaDrive emulator running on the platform. He told me: “If we use the same approach, we might be able to get MegaDrive games running on 3DS too.”

NH: It’s not quite the same approach. The point was that if we struggled with it as much as we did for the PS2 games, it might work. Doesn’t have a damn thing to do with the approach. (both laugh)

–  Did you wind up cutting MegaDrive features that weren’t being used in the game?

NH: We cut some of the fat, accelerated things by writing some assembly code and whatnot. However for the 3DS remakes, we wanted to effectively utilize the 3DS’s CPU resources as much as possible, so we wrote assembly where we needed assembly, and swapped out code as needed from the emulator, which was written in C. This took quite a bit of time, and turned into quite a magnificent bit of work. So we had to slowly cobble together performance speed by doing things like writing code that more easily hits the cache every time it’s called.

YO: It’s M2’s policy that any input lag is out of the question, which means they have to get the control response as close to the original as possible. Since that’s a project pillar, speed becomes a very complicated and important aspect of the program. They invested a lot in this point for the PS2 version, and the same amount of struggle went into the 3DS version as well.

NH: The older I get, the more exhausting it is. (laughs) I definitely have a hard time pulling all-nighters anymore. (laughs)

YO: So in the end, we decided not to do any straight MegaDrive ports for [3DS] Virtual Console. However, we figured that if we put in more resources and time than we would for a typical Virtual Console game, added in bonus content, and brought it to the table as a 3D Remaster Project title, then it might be worth doing. So we moved forward with several MegaDrive projects.

| The never-ending battle with slowdown.

YO: That said, after starting development, we immediately ran into problems. Unlike games like Space Harrier which were built in 3D from the very beginning, the difficulty of converting a 2D game into 3D was on a different level.

In order to give this an easy explanation, I’ve brought along the first version of the game we got working on the 3DS. Take a look. This is the prototype for 3D Sonic The Hedgehog. With this version, you can play from start to finish like you normally would.

Since the MegaDrive has two backgrounds layers and some sprites, the initial idea was to add depth information to the background portions, and then place sprites with depth info right in front of you. We thought that by doing so, the game image would come out in stereoscopic 3D. However, when you put the game in 3D like this, the screen looks empty. Compare it to the final version and you can see that the rasterized portions of the backgrounds look quite different. I wonder if the people reading this will get the picture. (laughs)

–  The rasterized portions of the background in this first version don’t have depth information yet, right?

YO: That’s right. When we played the initial version, we found that playing it in 3D didn’t really add much impact or appeal. Even though we’d got it running, we even started to think to ourselves, “maybe this isn’t going to work. Maybe we should just give up on Sonic.” Since Sonic was the flagship game for the MegaDrive, it would need to have a new aspect of fun to it in 3D… but the initial version was just a simple implementation of the 3D. We DID get it working, but the fun wasn’t there yet. Especially the first stage, Green Hill Zone, didn’t feel 3D and thus wasn’t very exciting.

However for the loop-de-loops in the stage, there were places that would have broken the 3D effect when you look at it which M2 told me they had fixed by patching the original code. In other words, M2 had gone in and applied 3D processing to those parts of the level by hand.

As we discussed that approach, M2 mentioned that while they were researching stereoscopic 3D, they found that if they applied 3D processing to areas of the stage that use parallax scrolling backgrounds[2], it looked amazing. So I said, if that’s the case, maybe we should add depth to the clouds, the ocean and all that. M2 told me that doing so was certainly possible technically, but it was going to generate processing overhead, and require a fair bit of work. Still, I felt like we definitely had to do it, so I kept bringing it up.

What’s more, to keep the game speed up, they hadn’t yet implemented the FM Synth emulation. Every time the FM Synth made a sound, the program would generate slowdown, so it was as if I was asking them to make it lag even more.

A 3D-compatible Virtual MegaDrive: the Gigadrive Plan

–  Something I was curious about when you mentioned how hard it was to get MegaDrive games to run on the 3DS was that, compared to the PS2 port,, it sounds like you have to squeeze out twice the framerate (60fps to 120 fps, 60fps x 2 eyes (left and right) = 120fps), all while not having any input lag. That sounds like a really tough goal, right? It’s pretty an amazing feat.

NH: Around the time we were building Super Hang-on for SEGA AGES ONLINE[3], Okunari-san told us to “make everything 3D,” so we put a bunch of different games into 3D and showed them to him. At the time, we’d actually built a development environment that allowed us to make and show off quick implementations of stereoscopic 3D at a pretty low cost. We figured we’d just run the same program on the 3DS and that’d be good enough. However on the 3Ds, a lot of things weren’t working (depth adjustments we’d made to the background and sprites were broken), so at that point, we knew going in and fixing each issue one by one would be no small task.

Let me give you an example. When you add binocular depth to the game (by creating two separate screens, one for the left eye, and one for the right), you tend to lose the right and left edge of the screen, since you can’t add art that never existed in the first place. Fixing little issues like this one by one gets pretty overwhelming.

Once we had decided to include depth in rasterized areas, we figured we might as well build a MegaDrive architecture that supports stereoscopic 3D, a new SEGA console we dreamed up, which we decided to call the “GigaDrive.” We figured that if we can build this new platform on the 3DS using emulation techniques, and then create a version of Sonic The Hedgehog that runs on it, all our problems would be solved! This would give us smarter and more flexible 3D compared to patching the MegaDrive game program. In that sense, you could say we’re just “patching” a patch for a GigaDrive game, which gave us a lot more latitude to work with.

–  So that changed your approach to the port.

NH: That’s right. But at that point we still had no idea if the thing was going to work. (both laugh)

Inside this “GigaDrive”, we increased the number of background layers to four, gave each layer a Z-value (depth info), and gave each raster line a Z-value which allowed us to for instance, knock the lake into the background. Funny because I was just mentioning how hard it would be to port the game since the Megadrive has two background layers. (both laugh)

3D Sonic the Hedgehog
Depth was added to the clouds on this stage as well. Note that the Japanese version has parallax scrolling for the sky, but the overseas version only has one background layer.

–  I see what you mean.

NH: So, rather than patching a MegaDrive game, we approached the project with the idea of porting the game to new hardware (which was already running on the 3DS).

–  Would that let you port the graphic-related data as-is?

NH: Yes, and we can also port over the game’s main routine.

–  I guess that means you’re saving processing load at a lower layer then?

YO: All of these struggles with the code came about because of my irresponsible request. But after a while, they managed to get depth showing for the rasterized portions. At that point I felt like the effect was looking pretty good. In the stages after Marble Zone (Stage 2), there’s quite a bit of rasterized imagery, and once they made those areas 3D, I felt like the approach was going to work. We had finally seen the light at the end of the tunnel.

However, starting from this version the game speed dropped below 100%. (laughs)

NH: Yeah, we were consistently losing about two frames of processing.

YO: Now there was one bit of 3D processing M2 had included which I didn’t ask them for. It was the depth effect between Sonic and the trees in Green Hill Zone. You might not notice it when you play the MegaDrive version, but there are actually two types of trees there, ones in the background and ones in front of Sonic. M2 added depth difference to them. Which meant that suddenly it seemed like the area Sonic was running in had real depth. I said, “hey this is amazing, let’s use this,” at which point Horii-san looked at me with a deeply serious face and said, “On every stage?” (both laugh)

NH: Of course I did! I mean, we’re talking about EVERY STAGE! (laughs)

YO: Which means more processing load. And on top of that, since this was on the GigaDrive, it all of course had to be done by hand.

3D Sonic the Hedgehog3D Sonic the Hedgehog
Some trees are in the background and some in the foreground. In the screenshot on the left, you can see Sonic overlapping the flowers in the background and running behind the tree in the foreground. On 3DS, these flowers look like they are blooming in the background. On the right, we have a similar tree. It’s positioned behind behind Sonic.

–  Depth effects were created in the original game by just changing the sprite draw priority rendered on the same layer. But once you assign depth values to those sprites, you’ve got something completely different, right?

NH: That’s the gist of it.

–  (smiles) And you’ve got to assign priorities one by one, right?

NH: One by one. And of course it’s different for each stage.

–  I see…

YO: The last bits of 3D we added in were the electric lights and construction signs in Starlight Zone. There are some that are brighter and some that are dark, but this depth is baked into the graphic.

NH: We wanted to realize what the original graphic artist for these objects wanted to do. …and also everyone points it out, so we wind up doing it.

3D Sonic the Hedgehog3D Sonic the Hedgehog
In the left screen, the object in front of Sonic is in the background, and the one behind him are in the foreground.  In the right screen, the 3D positioning of the red cone objects are implied by the way they’re lit.

3D Sonic the Hedgehog3D Sonic the Hedgehog
If you look carefully at the lights, some are bright and some dark. When viewed in 3D, they are of course shown in the background. The metal scaffolding on the right is in the foreground and thus is in the very foremost layer. In the right-hand screenshot, you can see a difference in depth for the warning signs.

–  In other words, since there are already objects that that feel like they have depth to them in the game it wouldn’t feel right if depth information wasn’t assigned to them… It seems that the original team on the MegaDrive was trying to create visual depth by using objects that are alternately lighter and darker. So when you remake the game 3D, they’d look off without depth information.

YO: These are the kinds of things that slowly build up as we argue over the details, even though we have to keep the game speed up…

–  (laughs) So does adding depth increase the background layers?

NH: We added four background layers, and that’s a lot to process already, but changing the depth info on top of that adds even more processing and slows down the program. From the start, before we even thought about maintaining the framerate we were already short on processing power. So as we added things, we made speed improvements along the way.

–  On one hand, you’re adding things that require more processing, and on the other you’re doing your best to reduce the processing load. Sounds like this project was also a constant struggle.

YO: For Space Harrier and Super Hang-on, the games themselves were built in 3D from the start, so all we had to do was add 3D based on the program itself and that was it. However in Sonic’s case, 3D depth data didn’t exist, so we had to survey the art and add depth as appropriate. Also, when you turn off 3D, it has to look just like the original MegaDrive version. The differences between the two are pretty interesting.

NH: With Sonic The Hedgehog, I think we’ve gotten the game to the level where if you went back and played the original, it feels like Space Harrier does, like it was built in 3D.

YO: Building Sonic like this, I feel like you guys really boosted your tech for porting MegaDrive games to the 3DS.

NH: Absolutely. Just looking at the finished game, you might not think we struggled much with it, but really the whole thing was a struggle. It all comes down to one thing: Adding priority to sprites that have depth, even if they’re part of the same graphic.

YO: It’s like they say in the animation industry: “We spent days on a 5 second cut.” (laughs) That’s very much M2’s style, and it’s what it took to get stereoscopic 3D working.

Just adding Spin Dash does not a finished job make.

–  So what’s the ‘Special’ addition to this game?

YO: Alright, let me introduce some of the game design changes we made for the 3DS version. Looking back at the release of 3D Space Harrier and 3D Super Hang-on, one thing that we were concerned about was the game difficulty. So for this game, we went in and implemented stage select as a standard feature, i.e. the one that was included in the MegaDrive version as a cheat code. If you turn ‘Special’ on from the very beginning, you’ll be sent to the stage select screen when you start the game.

Originally, you could go to the stage select in the MegaDrive version by inputting the cheat command at the title screen, but since it was a cheat code and Sonic being a twenty year old game, we figured we should just make it a standard feature. The ‘Special’ setting is off by default, but if you turn it on, you can play from any stage you like the first day you buy it.

The original (Japanese) manual and advertisements for Sonic The Hedgehog mentioned that the game had “a variety of stages.” Because of that, lots of people, including myself, played hard to get to the next stage. But the first game was pretty hard, with stages like Marble Zone (Stage 2) and Labyrinth Zone (Stage 4), and I think some folks probably gave up on the more technical stages. If the same thing happened in this version, you wouldn’t get to experience the fun of running through some of the later stages in 3D like Star Light Zone, which M2 has spent a lot of time on. And that would be a bummer.

–  At the time, I probably didn’t give it any thought, but now that I think about it, there is a lot of stuff in this game.

3D Sonic the Hedgehog3D Sonic the Hedgehog
In 3D Sonic The Hedgehog, not only can you switch between the Japanese and International versions, but you can also use the Spin Dash, which was never available in the original MegaDrive version. The Spin Dash graphics come from Sonic The Hedgehog 2.

YO: We’ve made the stage select a standard feature because we want players to see every stage, and for the people who gave up on the original to come back and give Sonic another try. One more thing is the Spin Dash. This was actually a lot of work to put in. These days, everyone knows the Spin Dash from modern Sonic, but it wasn’t in the very first game. So when people go to play the first game, they’re like, “Wait, what?” (laughs)They always try to Spin Dash right away.

The only version that included it was the version included in Sonic Jam for the Saturn. You can use the Spin Dash in that version, so when I asked M2 to put the Spin Dash in, I brought the program source along with me. (laughs)

–  I see. (laughs)

YO: But Sonic Jam[4] was a Saturn-era game, so it wasn’t running Sonic The Hedgehog via emulator.

NH: First off, we wanted to find out if there was some data in Sonic Jam that resembled the MegaDrive version of Sonic The Hedgehog, and if there was, we could just do a comparison to the original game, note the differences, and analyze them. But as we got deep into the code, we realized “there’s nothing like that here at all”, and that’s where the story starts.

YO: M2 told me: “we looked over Sonic Jam’s source code, but we don’t get it.”

NH: Well, it wasn’t so much that we “didn’t get it” but rather that looking through a couple gigabytes of data and picking out what we need would be super exhausting. So I asked Okunari-san, “We need to know where to start looking, so please let us talk with the original development staff.”

YO: I immediately went to Takashi Iizuka, the head of Sonic Team, and asked him who worked on that portion of the game, and he told me, “Oh, Yuji Naka did that part.” His name was in fact in the credits, despite being a department manager at the time. (laughs) So Yuji Naka himself added Spin Dash as a “fix” to the original MegaDrive version… I had no other options, so I wound up sending a mail to Naka-san, who is now the president of a company called Prope, and asked, “Sorry, but could you let us know how you added Spin Dash to the game?” And he replied with some sage words of advice.

–  Oh, wow!

NH: There was a nice explanation and he basically said “It’s easy, give it a shot.” Which makes you go: “Easy!?…what the…” you know? Man, people from that era are really amazing. But thanks to his help, we were able to get the Spin Dash implemented. Still, it’s not like we just put it in and it worked perfectly. No, once we started playing with it, we ran into places in-game where we had to question whether it even worked with the game design. Once it was implemented, there was a ton of things to check.

YO: When it was first implemented, there were no animations or graphics for it. Since the action wasn’t in the original, the graphic wasn’t either.

NH: Sonic The Hedgehog already nearly maxes out the MegaDrive’s VRAM, so when you’re told to add in Spin Dash animations on top of that, you don’t have much space to work with. That’s when we decided that our new virtual platform, this thing we were calling the GigaDrive, needed a VRAM extension.

YO: After that, we were able to pull graphics and animations from Sonic The Hedgehog 2 and add them into the game. The next problem we ran into once the Spin Dash got implemented was that since it wasn’t an action in the original, there were places in the game where you would wind up flying off the screen and dying.

I sort of panicked, and was saying “oh, this is bad,” to which M2’s programmer said: “well, what’d you expect?” So I went back to Sonic Jam to see what they had done, and it turned out they’d addressed all those bugs in their version. That’s when we realized that we’d need to bring in not only the move’s action itself, but all the bug fixes from Sonic Jam that went along with it as well!

–  Wait, so you mean that the Sonic The Hedgehog in Sonic Jam wasn’t using the original MegaDrive version’s data?

YO: No, it was based on the original data.

NH: It’s doesn’t run on an emulator; I think the original code was most likely adapted for the Saturn. It’s similar to how people got arcade games running on the X68000. It was a pretty common approach for titles in the latter half of the Saturn’s lifecycle. This is also similar to the method used to run Space Harrier on the Super 32X.

–  So the changes made to the Sonic Jam version were useful as a reference point?

NH: Yes they were.

YO: The programmer at M2 knew early on. In an interim version of the game, I got really excited that the Spin Dash was working but he pointed out to me: that “yeah, it ‘works’, but that’s all it does…” Anyways, after a bit of a process and before I knew it, the Spin Dash had been implemented perfectly. Although it was really pushing up against our deadlines…

NH: You know, Okunari-san touched on this earlier, but since people assumed that the Spin Dash would be included by default, once you implement it again, they wind up thinking “well of course I can Spin Dash”.  Whereas it’s something we were pulling our hair out over…

YO: Yeah, after M2 worked so hard to get the move in, they told me they wanted to make the Spin Dash the game’s “Special” feature. But I said, “No no no, in this day and age, people expect the Spin Dash. We should just slip this into the main game.” No one’s likely to turn off Spin Dash, other than those who just really want to play the complete original version. Not nowadays. So we quietly included the option to turn Spin Dash off in the back of the system options.

NH: And I was fine with that… Okunari-san always comes to us with these sorts of proposals, and we’re more than happy to implement them. But then… when we tell him, “Hey, um, you know this is going to take a while, right?” and start talking deadlines, he’ll tell us: “The deadline is iron-clad. If it’s not going to make it in time, then we don’t have to implement it.” That’s the spiel, but somehow every time, the changes make their way in…. Okunari-san has a lot of opinions that come from him personally, and not from a producer perspective. And I think that’s without a doubt been key in maintaining the quality of the 3D Remaster Project.

–  (Laughs)

YO: As a result, they’ve managed to make 70% to 80% of the reckless ideas I throw at them happen.

NH: So when he says “Don’t do it if it’s not going to make it in time,” that’s generally what winds up happening.

| The 3D Remaster Project moves forward!

YO: Thanks to this support, Horii-san’s “GigaDrive” steadily presses on.

NH: From M2’s standpoint, since we’ve gotten away from the original plan to emulate the game in 3D, and instead wound up creating an extension of the hardware spec that makes it easier to put MegaDrive games into 3D, we think of the GigaDrive as an ‘unofficial’ new SEGA console.

The specs are very clearly defined, and someone out there with enough skill could make probably make the same hardware. That’s the level at which we’ve built it. In other words, if you (virtually) popped in a GigaDrive cartridge, you could play Sonic in 3D, and if you took an old MegaDrive cartridge and put it in, you could play that too; we’ve built it with that type of cross compatibility in mind.

Personally, this is something I care deeply about. I don’t know how people would react when they hear the word “GigaDrive”, I don’t know if they’d say “Huh? …what’s that?” or get totally hyped about it, but I’ll send you a spec sheet, so you can check it out for yourself. (laughs)

GigaDrive (aka Super MegaDrive) Specs, Draft v1.0.

In a fictional version of the early 1990s where 3D TVs have proliferated, M2 has finalized the specs for an imaginary 3D TV-compatible SEGA game console, the GigaDrive. The 3D MegaDrive, which will subsequently be released by SEGA, will conform to these imaginary hardware specs. While highly unlikely to ever see the light of day, in the off chance that it does, M2 has taken careful consideration to ensure backwards compatibility with MegaDrive cartridges. In this era, once 3D MegaDrive titles popped up, a fair selection of games were released for the GigaDrive.


Hey you!! Why not give SEGA’s new imaginary console a test drive with 3D Sonic?


* Please note the specs below are in draft form. There will be changes in subsequent revisions.

¦ The GigaDrive supports backward compatibility with MegaDrive games (Unmodified MDROMs will run normally without modification)

·Expanded VDP register for controlling expanded functionality included

·Expanded VRAM included

·Four extra background layers included

·Z-values can be set for each extra background or raster line

·Every sprite has a Z-value setting.

·VDP and Expanded VDP registers are memory-mapped and accessible

·VRAM and Expanded VRAM are memory-mapped and accessible


* Memory Map


* $c00000 r/w VDP DATA

* $c00002 r/w VDP DATA

* $c00004 r/w VDP STATUS(read)/CTRL(write)

* $c00006 r/w VDP STATUS(read)/CTRL(write)

* $c00100-$c0012f -/w VDP REGS(write only)

* $c00130-$c0015f -/w EXT VDP REGS(write only)

* $c00200-$c0024f r/w VSRAM

* $c00300-$c0030f r/w DIPSW

* $d00000-$d0ffff r/w 64KB VRAM

* $d10000-$d1ffff r/w 64KB EXT VRAM

??Detailed I/O Map spec omitted??

NH: I thought it would be pretty awesome to reproduce the ultimate MegaDrive on the 3DS. To keep the MegaDrive atmosphere intact, we made no changes to the art palettes. There are still four.

We did expand the background layer count by four…  two each for the left and right eye. And these can hold Z-values for each render line. Sprites have Z-values as well. And, since there wasn’t enough VRAM for 3D Sonic The Hedgehog, we expanded the VRAM by another 64Kbytes, to twice the size of the original MegaDrive.  With just a little more pushing, maybe we could actually build some hardware with it. Not that SEGA would sell it for us though. (both laugh)

YO: Well, there wouldn’t be any software for it, right? (laughs)

NH: Yeah, there wouldn’t be. We’d of course be happy to make some ourselves though. Incidentally, when I told people at the office that Project GigaDrive was our next project, they all started using “GigaDrive” in their weekly and daily reports, and getting really involved in the whole idea. So internally at M2, I think it’s been a really good thing. Maybe in a couple of years, we can get Power Drift running on it and put that out. (grins) That’d be cool.

–  With regards to the GigaDrive’s architecture,  what level of hardware are we talking about?

NH: We’ve expanded the flexibility of the MegaDrive, to a larger extent than for instance how the PC Engine Super Grafx multiplied the number of sprites and backgrounds that the PC Engine had, and added memory to it. With the GigaDrive, Video Display Processor functions were added for the expanded game functionality, there are more sprite tables, you can use six background layers, the backgrounds have depth, all objects have depth, etc. Once you’ve got all this working, you can build Sonic The Hedgehog in 3D.

YO: Honestly, since we were really maxing out the specs, there are a few things that we cut compared to 3DS Space Harrier and 3D Super Hang-on. One is widescreen support. We haven’t done anything to show what would be outside the normal screen, partly to maintain the game balance of the original. We also wound up not adding a frame around the game screen.

NH: We really wanted to put in a TV frame. But if we did, there wouldn’t have been enough processing power to handle the stereoscopic 3D. Since that’s another thing we’d have to draw, we gave up on it. Instead we added “Classic Mode” as an additional 3D mode, where we were able to replicate a CRT TV in 3D. This mode is pretty nice. Hopefully you’ll agree that it looks like an old TV. The graphics blur too.

3D Sonic the Hedgehog3D Sonic the Hedgehog
In the screen settings menu, you can choose from Normal or Classic. In Classic mode, the screen curves just like a CRT TV screen, and the colors blur together similar to how they do on a real TV.

YO: Other companies have done the same thing, so you might think, “Oh, I’ve seen that.” But if you look really hard, you can see how the colors blend.

NH: It blends like it would if you’d hooked up a console with composite cables. The red blends a little less than a real machine. Give it a shot when you have a chance.

YO: Yeah, it does a good job of replicating that sort of fuzziness you see with the MegaDrive over a composite connection.

–  Does the process take a normal screen and apply a filter to it?

NH: That’s right. Well, it’s more like a shader than a filter.

–  So you’re adding processing when the screen’s being rendered.

NH: Correct. Which means we just barely get everything into memory, and that’s why we weren’t able to include the CRT TV frame. We struggled on that one.

YO: We also weren’t able to include full screen support or replays. That’s how hard it is to get MegaDrive games running on the 3DS; it was more challenging than porting an arcade game.

NH: Well, we could have got the TV frame in if we’d cut the stereoscopic 3D. (laughs)

YO: Although the additions to the game wound up being a little simple, we were able to get the MegaDrive Sonic The Hedgehog running perfectly on the 3DS, and with 3D to boot. So we slotted it in our line up as release #3. That said, you can’t really get an idea of the 3D in this game from screenshots, even more so than 3D Space Harrier, which is a little frustrating. For those who want to see how the 3D turned out, it’s only 600 yen ($5.99/€4.99/£4.49) , so please buy it and give it a shot. I want people to see it in motion.

–  Yeah I hope people check out the 3D effects on the rasterized parts of the game. People who were really impressed with the raster scrolling effect back then would love it. For those who have played the MegaDrive release, it’s kind of like a treasure hunt trying to find spots that are different from the original.

YO: The 3D makes you want to climb to the top of the stage just to look into the background. It’s the same game you played back then, but it looks completely different. In that way, I suppose it’s kind of like 3D Space Harrier. This year is the 25th anniversary of the MegaDrive, so I think it’s great that we’ve released Sonic in a milestone year like this.

NH: Parallax scrolling was often used by taking backgrounds and overlapping them with the intent of giving the impression of depth, so it’s perfect when you put it in 3D.

–  It’s pretty crazy to think that those backgrounds now have Z-values.

NH: Yeah. It shows you that if you spend time on something, you can work out the problems.

YO: I just give the orders.

NH: You also need time. With every project, I always think “if only we had more time.” (laughs)

YO: Since we now have the MegaDrive architecture running on the 3DS, we will be using it as much as we can going forward. However, some games work well in 3D and some don’t, so we have to consider whether we can remake them in 3D within the standard development timeframe for a downloadable game. For example, Landstalker would be an incredible game in 3D, but it has a lot of stuff that looks 3D that are actually 2D. For that reason, it’d be faster to just build it again from scratch than remake it in stereoscopic 3D. It all depends on the work involved and whether the game will sell, you know? Unlike Virtual Console, these aren’t just ports. They’re hand-made 3D recreations, and since we have to consider whether they’re worth the effort, it’s always hard to choose what to green light.

–  Oh, now that you mention it, when the 3D Remaster Project website was updated for 3D Super Hang-on, two more spots opened up. People were wondering if that means four titles will be released in all?

YO: As the Chinese saying goes: intro, development, pivot, conclusion[5]. Which implies four titles to some people. But that would mean Sonic is the pivot. (laughs) In any case, 3D Space Harrier and 3D Super Hang-on earned us a pretty good reaction, and the people who played it have help spread the word. Thanks to that, this project will continue on a little longer…  Really though, the next game is coming very soon. (laughs)

NH: Yes, the show goes on for a bit longer. We look forward to everyone’s support!

–  Thank you very much for your time. Can’t wait to see what you have lined up next! Keep up the good work!


Copyright ©2013 Impress Watch Corporation, an Impress Group company. All rights reserved.


[1] Gradius ReBirth is a WiiWare title developed by M2 and published by Konami in 2008/2009.

[2] Parallax scrolling is a technique where multiple images are scrolled horizontally at different speeds to give the impression of depth to the screen. While there are a few ways to do achieve this, the MegaDrive used a method called raster scrolling, which is specifically what Mr. Horii is referring to.

[3] Released as Sega Vintage Collection 3 overseas. Remastered version of classic SEGA titles for PlayStation 3 and Xbox 360.

[4] Sonic Jam, for the Sega Saturn, featured a version of Sonic The Hedgehog that had Spin Dash.

[5] Kishoutenketsu, a common narrative structure based in Chinese poetry.


SEGA 3D Classics – 3D Super Hang-On Interview with Developer M2

We continue our SEGA 3D Classic interviews with Super Hang-On, which appears on Nintendo eShop tomorrow alongside Space Harrier. We’re really excited to get these games out to fans and hope these interviews bring all new insight into not only the creation of the games, but also the finer details inside.

Thanks again to Game Watch and Impress, Okunari-san, and Horii-san for their involvement in making these interviews available to our western audience. Thanks to Siliconera for coordinating with us to help spread the word to SEGA fans across the web. And special thanks to our producer Sam for translating these interviews for everyone’s enjoyment.

If you read and enjoy this interview, please take the time to post a comment and let us know. We’ve got a lot of folks looking on reading the feedback, so don’t hesitate to post!


3D Super Hang-On
Using Gyro and Moving Cabinets to Create a new style of Port

Originally posted 3/27/2013

Pictured: Naoki Horii, President, M2 (left), Yosuke Okunari, Producer, SEGA CS3 (right)

–  Thanks for having me over again!

Yousuke Okunari (below, YO): We got a lot of positive response from our 3D Space Harrier interview article, so we figured we should give it another try. (laughs) But I wondered why that article [was so popular], so I wanted to ask you. For example, it seemed to have a very different reaction compared to, say, the article about Jet Set Radio, a game we just released last month. I’m thinking it’s thanks to Horii-san here showing up. (laughs)

–  I think there are several reasons, including the article being targeted at a different age group. Also, the fact that 3D Space Harrier isn’t just another port; it has full stereoscopic 3D, the moving cabinet mode and it reflects the freshness of what it was like to play the game when it was new. Something you often hear when it comes to retro ports is people saying “I used to be good at these, but I can’t play them anymore” or “It’s like being punched in the gut by reality”, but 3D Space Harrier nicely avoids these issues due to the ease of playing the game in 3D. As a player, it’s always a little embarrassing when you have to drop the difficulty or change the options around.

YO: When we were making 3D Space Harrier, we talked a lot about what we should to make the game more accessible.

Actually, what I argued with M2 the most about with 3D Space Harrier was the way we were going to have HAYA OH appear as the hidden last boss. At first, he would show up as long as you got to the end of the game, no matter what. But there’s no surprise to that, so I proposed that we add unlock requirements for him. The disagreement was with my initial suggestion, to set it up so you had to get to the end of the game with only three continues. I said, “Since players can create save points, this won’t be that hard.” But M2 was really against it. “Then not everyone is going to be able to fight him,” they said.

Naoki Horii (below, NH): I mean, these days, there are a lot of people out there who just play for 3 minutes and then they’re done playing for the day.

YO: So M2 proposed that if they start from the last stage and clear it without dying, HAYO OH should unlock, but I thought the challenge factor was way too low. In the end, we wound up putting both unlock conditions in. Seeing the reaction post-launch, there are certainly people like me who wanted it to be a little harder, but the majority seem to have been able to unlock HAYA OH by clearing the last stage without dying, so I feel that it was an appropriate difficulty setting in the end.

NH: If this was years ago, I would have gone with the harder conditions. As a player myself, I would want others to start from the beginning, go in focused and play to the end, just like the old days. My thinking hasn’t changed there. However nowadays, with people playing in trains and such, depending on how they play, they may not even see the stuff we’ve gone through the trouble to create, and the last boss may be out of their reach. I really wanted people to see it.

YO: On release day, I sat there watching Twitter to see when people would find it. And about one or two hours later, someone tweeted something like “Ah!” Two people were going off about it, and we knew neither of them. After that, more and more people popped up, and there was murmuring about whether or not they should keep it to themselves, this atmosphere like “should we talk about it at this point?” People were voluntarily restraining themselves from spoiling it from others, sort of like how people behaved after the movie version of Evangelion came out.

NH: That sort of unity is really cool.

YO: Seeing that, I feel like we were blessed with a lot of really considerate fans. It seems like those folks are the ones that really liked the previous article. So although it’s not quite the 8 years we put in for making Space Harrier, I figured we could have a chat regarding the 4 years it took to bring 3D Super Hang-on into being.

| From Virtual Console Arcade to SEGA AGES ONLINE, Making Hang-on without permission, and transforming Super Hang-on into 3D

3D Super Hang-On
The arcade version of Hang-on, released in 1985. The first bike race game in SEGA’s physical gaming lineup. Two versions existed, one where you leave the bike and one where you sit and use handlebars.

YO: This all starts with developing Space Harrier for the Virtual Console Arcade (VCA). Shortly after its release, M2 came to me one day and said, “We finished Hang-on!” which I hadn’t even asked them to work on. They told me that, since Space Harrierwas playable with the nunchuk, “you can play this one with the nunchuk too!” They showed it to me out of nowhere when I was visiting their offices.

NH: We really wanted to keep working on VCA. We wanted to put out every SEGA game.

3D Super Hang-On
Super Hang-on’s Mini Ride On type

YO: Hang-on started a new era within SEGA machine architecture, as everything up until then was SYSTEM 1 or SYSTEM 2, which was 8-bit hardware. But this was the first title on 16-bit boards, which wound up influencing the subsequent SYSTEM 16 core. Hang-on was further modified to create Space Harrier’s “Harrier board”, which was subsequently slightly downgraded and generalized to create SYSTEM 16. Since M2 had ported Space Harrier’s arcade board, Hang-onwas highly compatible.

NH: Relatively speaking, yeah.

YO: So one day I went to M2’s offices and there it was, Hang-on. At that point it was about half-done. If we were really going to put it out, there were a lot of things we’d need to change, like graphics we can’t use now, etc. Also, since Hang-on’s horizon line doesn’t move up and down, and the course only moves left and right, it’s actually rather a plain game if you just play it as-is. I didn’t feel like playing it with the nunchuk really captured the fun of playing the original. So since Hang-on by itself wasn’t really clicking, I thought that maybe if we released it in combination with Super Hang-on, we could add some historical context to create something I could get SEGA interested in. So that’s what we talked about.

NH: That was the discussion, yes.

YO: In the end, there was a lot of back and forth, but we weren’t able to push Hang-on through the company. We did however get approval to move forward with Super Hang-on, and we released in on VCA. But releasing only on VCA wasn’t enough… so we wound up releasing it on PlayStation 3 and Xbox 360 as well. And that’s how SEGA AGES ONLINE[1] was born, you see. If the Hang-on project had never happened, SEGA AGES may have never come into being.

– So that’s the background story.

3D Super Hang-On
Super Hang-on, released in 1987 (sit down version) inherited some of the courses from the previous title and had four courses in total. Like Outrun, you could choose the music before playing. The left grip had a super charger button, and your motorcycle could hit a max of 324 km/hr. Sit Down and Ride On types had different courses, except for Asia. There was a conversion kit for the Ride On type of Hang-on, but they were rare.

YO: This is how Super Hang-on’s development moved forward. Shortly after the release of the Wii version, I went over to see M2 and they told me: “We made Super Hang-onin 3D!”

NH: Around that time, there was talk about Nintendo releasing a successor to the Nintendo DS, and it turned out to be the Nintendo 3DS, which displays 3D to the naked eye, a device we never thought would exist. I got so excited I went and got a pair of red/blue 3D glasses. (laughs) Much like Space Harrier, these games where you move forward into the game are perfectly suited for stereoscopic 3D. So we tried it out, and it worked pretty well.

– So you just built in stereoscopic 3D compatibility without asking anybody? (laughs)

NH: At the time, we hadn’t gotten to grips with the 3DS yet, so we wanted to know what the 3D would look like.

– Why Super Hang-on?

3D Super Hang-On
Super Hang-on for Virtual Console. Supported Nunchuk but only had Mini Ride on Type courses.

NH: Well, there’s the fact that in Super Hang-on, you move forward “into” the background, as well as the fact that’d we’d just worked on it for VCA. So it made sense. That and we thought how it looked in 3D display was awesome, which made other games less attractive… (laughs)

YO: Around that time, PS3 had just started to support stereoscopic 3D as well. We had no plans to include it, but when I gave it a shot, it was definitely fun.

NH: When you crash and the rider goes flying… that’s pretty out there.

YO: We started talking about how great 3D was, and I decided to move forward with including it in the project. As a result, we released not only the PS3 version but also the 360 version with 3D support.

3D Super Hang-On
The Sega Vintage Collection 3 (JP: SEGA AGES ONLINE) version of Super Hang-on.

3D Super Hang-On
Sit Down and Mini Ride On type courses were supported, as well as stereoscopic 3D.

NH: As long as 1stparties build protocols for us, any current gen console is capable of outputting 3D on televisions.

| With gyro controls and the moving cabinet mode, at last we have a recreation of the real arcade machine experience.

YO: As all that was going on, I figured, “hey, since Super Hang-on is already in 3D, let’s go ahead and put it out on 3DS.” So the Wii VCA version eventually linked into this 3DS version, which wasn’t planned for at the outset. That’s how we got started on the 3DS version.

NH: There probably aren’t a ton of people out there buying every single port of Super Hang-on, but to those who do, we really appreciate it.

– (laughs)

YO: We had decided that our first 3D release was going to be Space Harrier. Then, one day when M2 was working on 3D Space Harrier, this “Moving Cabinet” mode showed up. It was M2’s idea, and they thought it’d be pretty fun to include. Ultimately we feel that it was a feature in 3D Space Harrier that fans were really happy about.

NH: Without a doubt.

YO: So we started wondering what we should do for Super Hang-on. Naturally, M2 had included the Moving Cabinet mode for Super Hang-on as well. However, when I played it, I blurted out:  “Where are the gyro controls though?!” Haha, pretty mean, right? Gyro controls were never in any plans for the game from the outset. (laughs)

NH: Yeah well… look… the thing with gyro controls is that the control is nice and all, but at the time it actually required a lot of extremely heavy processing. Putting them in meant we wouldn’t be able to maintain 60 frames per second. It was one of those rock and a hard place situations. After all, when we put the arcade mode into Space Harrier, we weren’t able to keep it at 60 fps then either, but we made some speed enhancements at the very end.

YO: I mean, when you think Super Hang-on, you remember playing on those arcade machines that you lean on, right? I said, “How can you not support gyro? That’s so un-M2 of you.” Apparently M2 had a whole struggle with gyro controls on their side, which I wasn’t aware of, and I just kept saying “I want gyro controls in.” And what do you know, a little while later… it was gyro-compatible. That’s a little bit of M2 miracle working. But honestly, just because the gyro controls got in, the game still wasn’t that fun.

– What!? (laughs)

YO: I believe we’ve had a few games that support gyro controls, but there aren’t a lot of people out there who enjoy playing like that. And the reason is that it’s just easier to play on the slide pad or d-pad. That’s why, in order to make it a more satisfying experience, I asked M2 to link the Moving Cabinet mode and gyro controls up, so when you turn, the screen tilts in sync, you know? And once they did that, the game become so much more fun.

NH: I think the thing that makes it so engaging is the fact that objects on-screen react in tune with your own movements. I think.

YO: By including gyro controls with the moving arcade cabinet, I think Super Hang-on is the first time we’ve really reproduced the feeling of a player moving an arcade machine.

NH: Oh, for sure.

YO: People who played the games years ago probably know this, but SEGA’s arcade racing sims would be released in pairs, where one arcade machine moves on its own, and players move the other one. Examples of the former would be Space Harrier, Outrun, Afterburner, and examples of the latter are Hang-on, Enduro Racer, and Super Hang-on.

So I decided that if we were going to release something after Space Harrier, it should be a game where you move the machine with your body, so in that respect the release order makes sense. Syncing up the gyro and the screen creates an incredible simulation of moving the arcade machine. I’ve had a number of people play Super Hang-on, and while the person playing isn’t moving at all, to them it seems like they’re really moving around. For 3D Space Harrier, when you’re in arcade machine mode, you kind of sense that you’re tilting because the screen is tilting, but since 3D Super Hang-on has screen sync, you really feel as if you’re tilting. So yeah, I think we’ve reproduced that arcade experience.

Super Hang-on hadn’t been ported much up until we did the Wii version, so if you’re not the type who went to arcades a lot, you might get the impression that it’s a rather obscure game. Also, since the MegaDrive version was one of the first games to come out, it was a little on the plain side. The X68000 was able to use the Cyber Stick (an analog controller), and the port one after that was basically the Wii version. The Cyber Stick and Wii nunchuk kind of give that tilting feeling, but it’s not the same as the whole bike leaning back and forth.

NH: Like Okunari-san is saying, 3D Super Hang-on is the best there is in replicating that feeling of being on the arcade cabinet’s bike. But if you’ve been following us up to now, you have to realize that this is totally coincidental. (both laugh) We didn’t really aim for it to be this good, so we actually feel a little bitter at the result [because it was accidental rather than intentional]! If the whole gyro discussion was as easy as thinking everything out ahead of time and deciding how we were going to adjust each part of the game, building that into Moving Cabinet mode, and then saying “Here you go!”, we could feel like we accomplished what we set out to do. But it never turns out that easy… (laughs)

YO: By tossing the ball back and forth with M2 like this, I think we’re making some pretty interesting games. With SEGA AGES, we really managed to satisfy people with the quality of the ports themselves, but you know, it’s also about playing the game as it was when the original came out. I feel like the amount of people who appreciate the ports for their faithful reproduction of that original experience  are on the decline, so the approach we have with the 3DS, of adding new ideas to the experience, is something I feel has a good resonance with our fans.

NH: You can take it with you, and pause whenever you want.

YO: Yup.

– Let’s hear more about some of the detailed work that went into 3D Super Hang-on. I’m going to play it while you guys talk.

* Additional Difficulty settings also allow for Time Attack

3D Super Hang-On
Six levels of difficulty. Sit Down and Mini Ride On types also have different difficulties. You can also adjust the time limit.

YO: OK, well, one of the things that M2 really focuses on is difficulty. The original arcade version had four difficulty levels, but this one has six. The VCA version was a straight port, but while we were working on that, we had a problem where some of our testers weren’t able to clear the game. The game was too hard. In the end, we managed to solve the problem, but in the SEGA AGES[2]version, we thought we should add some difficulty options that weren’t in the arcade version. So we wound up adding more time to the clock when you pass through a checkpoint.

NH: That’s right. We boosted the time bonus.

YO: For 3D Super Hang-on, M2 also disabled the hitboxes for opponent vehicles.

NH: Some might say at that point, why not just remove the enemy vehicles altogether? But if you do that, the screen looks really empty. So we left them in to keep the game screen lively.

YO: These settings weren’t in the original game, and you could almost call it a Time Attack Mode. Since you can hit your corners at max speed, the game is easier to clear. For people who’ve played the game before, putting it into the easiest difficultly level and just having a pure battle with the course itself is also really fun.

NH: And if you run into an opponent, it’s OK. (laughs) They won’t slow you down.

– So compared to the arcade version, you’ve basically added two difficulty settings lower than the original easy setting.

YO: That’s correct.

* Button Configuration Options

YO: We also added in the ability to configure your buttons. (laughs)  This wasn’t included in 3D Space Harrier, but it was something we heard a lot of people ask for.

3D Super Hang-On
Custom configurable controls. Even more customization than 3D Space Harrier.

NH:Sorry about that. We figured that if we had rapid fire and all, no one would need a button config, but we got a lot of requests for it. We had a change of heart. (laughs) Sorry for underestimating everyone!

YO: M2 and I argued quite a bit on the button config defaults… Like, since you hit turbo with your thumb normally, I thought the Y button would be perfectly fine. I mean, strategically speaking, the Y button is the easiest to hit when you really need to push turbo rapidly. But it might be a bit tricky for people when they first pick it up if the accelerator isn’t on one of A/B/X/Y buttons, so currently the default is the R button. For those playing Time Attack hardcore, or people who play the game a lot, I would suggest adjusting the button config to find a setting that works best for you.

* Screen Size & Moving Cabinet Mode

3D Super Hang-On
Choosing Sit Down Type will also change the screen frame.

3D Super Hang-On
Four screen size settings and Moving Cabinet Mode, with four levels of tilt.

YO: The screen size is the same as 3D Space Harrier, but for this game, the default view frames the screen. This is simply because we want people to play using the gyro sensor. This is the first time the game has supported wide screen, and it’s something we put a ton of work into, but since gyro mode is so fun we had to choke back our tears and pull widescreen from the defaults. If you play using gyro with widescreen, it just doesn’t feel quite right, you know? You have to see the edges of the arcade cabinet when the screen tilts. That’s why we set the screen defaults to framed. You can also choose between the Sit Down or Mini Ride On[3] versions of the game, which will change the arcade cabinet graphics accordingly.

For the Moving Cabinet Mode, since you move the game yourself, we put three levels of “leaning” in the settings. When the game is in Moving Cabinet Mode, the gyro controls will be enabled. Note that once they’re turned on, the gyro settings will reset to their defaults. Also, per M2’s request, you can set it so the screen will lean in the opposite direction the control leans (normally, turning right will make the screen lean left, but you can make it so turning right leans the screen right). I don’t know if any of this is needed, but some people might like it that way.

NH: These are the kind of things that are just fun to include, you know?

YO: For the Sit Down type, since the original cabinet didn’t lean, we considered disabling the gyro controls, but… well that would be no fun, so for the Sit Down type, we made it move too. (laughs)

NH: The players can just turn off gyro controls if they want, you know?

YO: And this is digressing a bit, but when we were developing the Sit Down version for Wii, we went and looked at a real arcade kit. At the time, the only machine in the city or suburbs was one over at “Game Fuji” in Ichikawa. So we made the trek to take some pictures of it, and the photos we took are the ones we wound up using for 3D Super Hang-on’s Sit Down frame. (laughs) The cabinet might not even be there anymore, so we are really in those guys’ debt!

* Lap Times & Continuing

YO: In 3D Super Hang On, we made it so your lap times get recorded now. Oh and we added a stage select. So if you get a game over on any of the courses, you can restart from the nearest odd numbered stage. The reason why you restart from the odd stages is that the backgrounds change with every odd numbered stage, so the game itself is made as if each two-stage pair is a single course. We actually did try and see what it’d be like to start from the even stages, but some of the checkpoints would be right in the middle of a curve, so it didn’t give you a good start. Odd stages always start like normal.

3D Super Hang-On
Lap times are recorded. You can also start on odd numbered stages, and save anywhere in-game

* Sound & Arcade Sound Effects

YO: We didn’t include any arcade cabinet sound effects[4] this time.

NH: Right because there wasn’t much to record.

YO: We talked about putting the banging sound from when you lean on the machine in, but that’d be it. So since it’d be kind of weak with just that sound, we cut it. Instead, you can play the background music as much as you want, and the equalizer screen’s buttons are much easier to use this time around! (laughs)

3D Super Hang-On
Sound setting screen. The equalizer has been improved over 3D Space Harrier.

NH:Everyone brings that up. Things that get thrown in at the end get put in rather hard to find places. That was the first thing we heard about.

– (smiles) Yeah, when I was playing 3D Space Harrier after it was released, I had to kind of search for it. (laughs)

YO: In that sense, M2 is getting better at this. (laughs)

Oh, and on another unrelated note, when we first ported Super Hang-on, we had ROMs on file internally for both the Sit Down and Mini Ride On types, but the Mini Ride On type ROM still had copy protection on it. So when we were porting to the Wii, we had to use the Sit Down type ROM. However, the courses for the Sit Down and Mini Ride On types are different. And you know, back when Super Hang-on was in arcades, I think…

NH: … More people played the Mini Ride On type. Probably.

YO: So we decided that we needed to use the Mini Ride On type. For the Wii version, we were in a dead heat between M2 working to get the copy protection off, and hitting the schedule deadline. It was neck and neck for a while, and once we hit beta, we wound up swapping the ROM into the game. Our QA test team quickly came back to us and said:  “Um, all the stages have changed.”

– Well, that would be a bit of a surprise if you didn’t know. (laughs)

NH: Since that would basically mean starting testing all over from scratch, the test team was furious. We appreciate all the hard work they put in.

YO: That said, switching the ROM had the side effect of helping them clear the game (The Mini Ride On type is a little easier). However they found a bug about four days before we were going to master up[5]. If you ran over the curb for an extended period, the game’s music would cut out. Suddenly we had to figure out whether this was something that happened in the original version or if it was a bug in the port, meaning we had to do an urgent verification on actual hardware. At the time, there were two places in Tokyo where Mini Ride On cabinets were running: Club Sega in Akihabara, and Warehouse in Shinonome (which no longer exists), but they were both broken at the time. (laughs) So we didn’t have any choice but to ask a favor from the guys at the Akihabara store to take the machine they had, which was pulled to pieces in the arcade’s backyard, put it back together and do emergency repair procedures on the broken spots. Then, when we tried reproducing the bug, bam! It showed up! (laughs) Since it occrred on the original hardware, we left the bug in for the SEGA AGES version, but for 3D Super Hang-on, since this was supposed to be the final version, we fixed it just like we fixed the SFX bug in 3D Space Harrier.

NH: That we did. It had to do with sound requests. Once a sound started playing, it would keep going waiting for the next “key off”, or the other way around. It’s something that happens with a lot of SEGA games.

– (laughs) OK! So what’s the “Special” feature for this title, then?

YO: Our special feature for this game is the “World Course”. It was a part of the “Trials” mode in the PS3 and Xbox 360 versions, but this time, if you race all four courses, the “Special” mode will unlock. This was an idea I had back when we were working on the SEGA AGES version, but something that’s always bothered me was the background music. You see, when you played the World Course [in the PS3/Xbox360 versions], you’d have to listen to the same song for something like 30 minutes. Even if you really liked that song, you tend to get tired of it. But this time, the music will change when the course changes. I brought the issue up with our director on the PS3/Xbox360 version, and he told me with the saddest look on his face, “If only you’d told me a bit sooner…” So right from the start of 3D Super Hang-on, I was like, “You remember that thing we talked about?”

– (laughs)

YO: Now you choose which song you want from the very first Africa course, and the other three songs will change in order. By the time you get to the end, it’ll have played all four songs.

NH: Hope you enjoy it. (laughs)

YO: Oh, and for the PS3/Xbox 360 version’s World Course, we used the Sit Down Type courses, but this time you can choose between Sit Down and Mini Ride On types.

There’s also a World Course ending, which is something totally new that M2 made. Hopefully people will get a kick out of it. It’s based on the pre-existing graphics, but it’s the first new animated sequence for Super Hang-on in 25 years. (laughs)

NH: Actually we apparently only made one new graphic. We needed to add something. If you know the game, you’ll recognize it when you see it. Definitely check it out!

– (laughs) I’m excited about the release now, as well as the credits!

3D Super Hang-on’s biggest selling point actually isn’t the 3D

YO: You know, as a game 3D Super Hang-on might be a little plain, but if you’ve played 3D Space Harrier, I think you’ll find a lot to enjoy. We’ve got the 3D from 3D Space Harrier, and the gyro controls. I want people to give the gyro controls a shot, so we put the gyro control option right there on the menu where it stands out the most.

– You’re really pushing the Gyro! (laughs)

YO: I’m telling you, 3D Super Hang-on’s gyro control has a taste all of its own. A lot of the fans who played 3D Space Harrier said “I didn’t see the point of playing in 3D on the 3DS so I’ve been playing in 2D. But I turn the 3D on for 3D Space Harrier.”  We felt really honored to hear that. For those who haven’t played with the gyro sensor on 3DS much, please check it out in 3D Super Hang-on. The difficulty of the game is up to the player, but comparing this version’s controls to those of earlier versions, including the nunchuk on the Wii VCA version, we firmly believe the 3D version has the best controls.

– When I played it with the nunchuk, I found it really easy to maintain my course. You can do that on an analog stick [like in the PS3/Xbox360 version], but personally, I felt that tight spots were easier to manage on the nunchuk. I found it really useful when you go into a corner and hit turbo for a speed boost, or when you want to yank the handle slightly, or pull it and then hold your course.

YO: Yeah, the gyro controls make it even easier to hold that mid-lean state.

– I noticed this when I played 3D Space Harrier too, but it’s really noticeable how easily the 3D allows you to see where things are positioned. The PS3/Xbox360 version of SEGA AGES ONLINE also supported 3D, but I think there probably weren’t as many people on those platforms who experienced it. The 3DS has 3D built in at the hardware level, so as long as you have one, anyone can check it out. Plus you’ve got the gyro controls for another, different experience.

 NH: Yeah, exactly. You don’t have to add anything else.

YO: The biggest sales point for 3D Super Hang-on actually isn’t its 3D. It’s the gyro controls. It’s really Gyro Super Hang-on. The one unfortunate thing is that if you are going to use gyro, you should turn off the 3D. But that’s not something we can work around.

– That’s something that’s tricky with naked-eye 3D, I guess. It moves you out of the sweet spot.

YO: Yeah. If you’re playing in 3D, I recommend turning off gyro and enjoying the game in widescreen mode.

– You guys had to work hard to get 3D graphics working on 3D Space Harrier, but how about 3D Super Hang-on?

NH: Since we had stereoscopic 3D in the PS3 and Xbox 360 versions, it was just a matter of porting it to this version. And while we were initially concerned due to the fact that the arcade version of Super Hang-on had slightly different hardware compared to Space Harrier (the CPU clock was different, etc), we were able to get it running.

YO: I think we were able to get all the polish in since this is the same team that’s been doing these ports over and over. If this was their first port, there would have been no way to get all this content packed in within the timeframe we had. By linking the projects up and increasing their number, we were able to accomplish this level of quality. We’ve ported Super Hang-on to 4 different types of hardware at this point, and that’s what allowed us to add all these modes within the development time we had. If it was just a case of porting Super Hang-on to the 3DS as a one-shot, the best we could’ve done was get the game running and that’s it.

– Even though Space Harrier and Super Hang-on themselves haven’t changed much over the years, your porting these titles from previous releases on more powerful systems and adding new features, so it seems like that would be hard considering processing power. But despite that, you’re able to port them due to the amount of experience you’ve accrued.

YO: At first, when M2 told me “it’s not going to work,” I thought to myself “What kind of nonsense is that?”

NH: Even now, we pull him aside and tell him, “It doesn’t work. Sorry…”  (laughs)

YO: But if you wait a bit, they always come back and say “Ok, it’s running now.” See Horii-san? You can do anything if you put your mind to it. (laughs)

– (laughs)

NH: It’s funny, you know. We’ve been at it like this for years now.

YO: Really though, I hate the tough love approach. (laughs)

NH: I think we’ll keep making these gradual advances in processing speed and data reduction.  Even then it will be a slow improvement as we go along.

– By building games like that, you build leverage for the next project. And sometimes there’s a big pay off by combining things in a smart way.

NH: Yes, there are times when it does bear fruit. On the other hand, there are a lot of games out there that never had their time in the spotlight, you know? Like, Thunder Blade, and… um… Thunder Blade… (laughs)

YO: If we’d just put gyro controls into Super Hang-on and that’s the end, you’d probably just think, “well, that’s cute I guess…” But since we’re carrying on with the ports while making new stuff like that cool Moving Cabinet mode from Space Harrier, we’re able to make a bigger impact by combining the Arcade Machine features with gyro controls.

NH: It makes me wonder what cabinets for Afterburner or Galaxy Force would be like.

– How would you go about replicating that? Even if you give it the same description as the Arcade Machines for the other two games, the development approach and how it’d feel to play are completely different. Replicating that really requires building things one step at a time.

YO: If we were to port those, first we’d need the actual arcade machine. This time we had the photos on hand for the Sit Down type since we’d gotten them on a previous project, so it makes me want to document everything we can get our hands on, while we still can.

– That would be a ton of work. You know, as I play this with the gyro controls, I really think you’ve done a great job replicating the feeling of the cabinet, the slight difficulty that the leaning cabinet created, and the feeling when you cut back and forth. When things got really tough, I remember putting my feet down on the floor and just tilting the arcade machine. (laughs)

YO: When we were doing 3D Space Harrier, we wondered just how many people would get on board with this crazy idea.

NH: I wondered at first who we were even building it for.

– Certainly there were more than 1000 people that felt nostalgic for the moving cabinet and environmental sound effects. (laughs)

YO: The combination of those two was key. So I’m not going to say Super Hang-on is a simple game without it, but I hope people check this mode out.

NH: We’re running out of things to do now, so we want to hear from everyone next time their suggestions as what to try.

– Does that mean an open call for ideas? (laughs) This remake series seems like it really has to balance both the technical difficulty of emulating the game screen and the hardware, and emulating the cabinet itself.

NH: It’s not just a matter of getting the game to run at a perfect 60 frames per second, it’s the part about reproducing the authentic ambiance of the original that’s hard… And since Space Harrier wound up working so well… Everyone’s really busting their ass here. (laughs)

– (laughs) That’s because you raised the bar with 3D Space Harrier.

NH: Well, you could say that we’re burning both ends of the candle in order to knock everyone’s socks off. (laughs) To say we’re ‘looking for ideas’ might sound a bit weak, but please send us your feedback. (laughs)

– If anyone has any ideas for M2, give us a shout! (laughs) (NOTE: This article was originally posted some time ago, but M2 is always open to your opinions and feedback. Feel free to contact )

YO: That said, I think we’re already moving a little bit ahead of what everyone expects. I think the series is coming along pretty well. I think with3D Super Hang-on, people probably could have guessed we would do ‘3D’ and ‘gyro controls’, , but I think the game has enough to excite the people who played the original arcade machines and make them say “Hey! Look how they did that!”

– This series weaves together a lot of different technology, and I always admire how none of the work goes to waste.

YO: Yeah, it really doesn’t.

NH: You can build a mountain out of trash. Once it’s larger than Everest, it’ll be worth something! (laughs)

YO: I hope players get a new appreciation for the 3DS hardware.

NH: Personally I think it’s a really nice piece of hardware. Though developing for it is exhausting. (laughs) Still, for the players, it’s a really nice machine.

– I’ve asked every time we do this, but what’s in the future for the 3D Remaster Project?

YO: 3D Space Harrier has done quite well for us, and I feel like it’s lowered the barriers to doing what we want to do next.

NH: Thank you very much.

YO: This series will keep going after 3D Super Hang-on. Since we had Space Harrier in development ahead of time for research purposes, we are expecting to pick up the pace after Super Hang-on. The next one is going to be a lot of fun as well, so sit tight!

– Alright, well you’ve got me interested! Thanks so much!


Copyright ©2013 Impress Watch Corporation, an Impress Group company. All rights reserved.


[1] Known as Sega Vintage Collection 3 outside Japan.

[2] Vintage Collection 3 overseas.

[3] Super Hang-on has two arcade cabinet formats in Japan: Sit Down type, a more standard kit with a chair and handlebars, or Mini Ride On type, which has a small motorcycle that you climb onto and tilt back and forth to control. The overseas arcade cabinet had slightly different configurations, but generally they were the same.

[4] 3D Space Harrier contains sound effects that mimic the sounds of the original arcade cabinet. See the 3D Space Harrier interview for details.

[5] “master up” refers to creation of the final version of the game for submission to 1st party manufacturers.


SEGA 3D Classics – 3D Space Harrier Interview with Developer M2

SEGA 3D Classics - Space Harrier

We are extremely excited to present to fans a series of interviews on our upcoming 3D Classics on the Nintendo 3DS. The interview originally took place across the Game Watch and Impress website, featuring both Yosuke Okunari from Sega of Japan and Naoki Horii from the developer M2. These interviews show not only the care that went into making the absolute best versions of these titles on the 3DS, but also a lot of the technical challenges in creating 3D versions of our classic SEGA games.

Big thanks to Game Watch and Impress, Okunari-san, and Horii-san for their involvement in making these interviews available to our western audience. We hope you enjoy these interviews and encourage you to feedback with your own questions or comments. Let’s begin with Space Harrier and information on how the project got started…


SEGA 3D Classics - Space Harrier
Pictured: Naoki Horii, President, M2 (left), Yousuke Okunari, Producer, SEGA CS3 (right)

– Alright, let’s start by talking a little about this company called M2. Horii-san, do you mind?

Naoki Horii (below NH): Talk to people in the game industry and you’ll find out that everyone was a “gamer kid”. We’re no different ourselves, and our company’s first actual game was a MegaDrive title called Gauntlet[1]. That was a game that you could play with four people, and some friends and I from school and the local arcade got together and built a copy of the game from memory. We remade it exactly as we remembered it, took it to a company called Tengen, and finally got the money we needed to buy the materials we needed. Just like that. So our first game was a highly faithful port of the arcade version. You could call it a ‘copy by eye’ since we remade what we saw. That’s where I started, and here I am twenty years later, happy with what we’ve accomplished.

Yousuke Okunari (below, YO): He just wants to port the game he loved…

NH: Back in those days, arcade games were expensive and you couldn’t just buy them. Not only that but you had to keep feeding 100 yen coins into them. Even if you went and bought a port, it wouldn’t be the same thing. You’d think to yourself “Something’s just different.” We wanted it to play games as close to the original as possible, and eventually we figured we should just do it ourselves.

[1] Gauntlet was an action fantasy RPG game released by Atari in 1985. The MegaDrive version was released by Tengen. The MegaDrive version was released in 1993 and was called Gauntlet IV overseas.

– So it all started with Gauntlet.

NH: Back then, there wasn’t a good port of Gauntlet, so you couldn’t play with four players at home yet. Everything started once we thought “hey, we probably know this game well enough to build it.”

YO: Then eventually they started working with us (SEGA).

NH: Back in the time of Gunstar Heroes on the Game Gear, there was a SEGA employee named Hiroshi Aso. He approached us and said “Wow, you made Gauntlet, huh? Well how would you like to work on Game Gear? Go ahead and pitch a couple games you’d like to do.” So we suggested a game called Edward Randy[1]. If you think about it, Gunstar Heroes is just an improved version of Edward Randy. So porting that to the Game Gear was our first job with SEGA.

YO: Gunstar Heroes is often regarded as a game that really pulled out all the stops when it comes to the MegaDrive’s capabilities, and trying to port that to the Game Gear was no small task.  By the way, the Game Gear version is available in the Gunstar Heroes:  Treasure Box, on sale now[2] via PS2 Archives. You have to use a cheat code to play it though… (laughs)

NH: So we had a break from working with SEGA for about 4 years, and then we worked on the Windows version of Sakura Wars. We also helped out a bit on the Dreamcast version as well.  The first time I saw the Saturn version, I thought to myself “Oh boy, this game is just massive”, and I definitely remember how much of a rough time we had on that project.

YO: After the Dreamcast version of Sakura Wars, M2 was doing other projects for a while. Then a PS2 action adventure game called Project Altered Beast came along, and internally we had the idea of including the original Altered Beast in the game as a bonus feature. It just happened that M2 was working on a port of the arcade version of Altered Beast at that time.

NH: We were trying to port it by ourselves, you know. I just had a hunch that something like this might come up, so we went ahead and ported it without being asked to. That’s how we got started, right?

YO: Yeah, but the whole “put Altered Beast in Project Altered Beast” thing died on the drawing board. However, the fact that M2 could do ports got shared around internally at SEGA. So for Sega Rally 2006, the idea of putting the original Sega Rally in the game came up, and M2 was basically a silver bullet. Right around that time, AM2[3] was working on a port of Virtua Fighter 2 for SEGA AGES 2500, so we had a ported Model2 engine available. However, there weren’t any production lines open for Sega Rally and AM2 couldn’t get around to it. So then we asked M2 if they wanted to handle it.

NH: That was just learning from imitation, though.

YO: This wound up being M2’s first PS2 job with SEGA. For VF2, AM2 basically used an emulation-style implementation, but the Sega Rally’s arcade board was a later version than VF2, so it wouldn’t run as-is. M2 analyzed the game engine on their own, and rebuilt the game in the process of porting Sega Rally. In the end, it took a while to get Sega Rally 2006 released and it ended up coming out later than Space Harrier. VF2 had been received really well, and we decided to continue the ports this way for the SEGA AGES 2500 games. Right after I’d finished up on Dragon Force, we got the OK to continue on with the series. We were talking to a lot of developers in order to build the next lineup of ports, and that’s when I met them for the first time.

[2] Known as The Cliffhanger: Edward Randy overseas. Released only in Japan in 1990 by Data East.

[3] This a reference to Sega Ages Vol. 25: Gunstar Heroes: Treasure Box, a PS2 game only released in Japan.

[4] AM2, short for Amusement Machine R&D Department 2, is one of SEGA’s development teams. They are responsible for many of SEGA’s popular franchises such as Virtua Fighter, Shenmue, Daytona USA, Project DIVA Arcade games.

SEGA 3D Classics - Space Harrier

– Oh really? Wow that’s unexpected.


 YO: So from there, the idea of porting Altered Beast for SEGA AGES 2500 came up. But just doing an Altered Beast port as a packaged title would be kind of hard sales-wise, so we ended up having M2 port S.D.I & QUARTET[1], although in the end there probably wasn’t much of a sales difference between the two. (laughs) Next we said, “Hey, let’s do Space Harrier. Its hardware is pretty close to SYSTEM 16[2].” From there, we had M2 work on a couple of titles for us. And that’s how SEGA AGES 2500 Space Harrier II was born, which was released on PS2 Archives about 7 years ago.

NH: It still impresses me how much we code in assembly[3] even now. Our staff is really incredible…

YO: They showed me what were basically finished versions of Altered Beast and Shinobi running on SYSTEM 16, and though the sound wasn’t working yet, I figured if it was running this well, they’d have it up and running in no time. Boy was I wrong…

NH: When we tried to accurately reproduce all of SYSTEM 16 on a PS2, we couldn’t get the FM sound sources to fit in. When we thought about where to onload those, we remembered the PS2’s I/O Processor (33MHz) for the PS backwards compatibility feature. So we banged out some assembler code for it and got the FM sound source working. (For details check out Sega Voice Vol.15)

YO: It was Space Harrier’s 20th anniversary at the time, and since it’s a game from 20 years ago, we figured that the PS2 would have no problem running a game like Space Harrier. I mean, it ran on the Dreamcast after all (it was in Shenmue), but that’s just not how it worked out. The ins and outs of emulating things were still being figured out back then. Being new to this, even I thought we could churn out ports pretty quickly, but it turns out that wasn’t really the case.

It turns out that since the hardware is different, it takes quite a lot of machine power to emulate these games. M2 is quite fussy about these kinds of things, and they wanted to really get the controls right from the get-go. In other words, eliminating input lag. Around this time, people were really concerned about this term “input lag”. They’d say “really, the hard part is reducing input lag as much as possible.” Space Harrier is actually one of the easier titles in this sense, but for other games, reducing input lag is a big task and took up a lot of our time.

NH: There are a lot of situations where if we could just slow the processing down by a single frame, everything would be much easier.

YO: Sort of like how when you use a number of polygons at 60 frames per second, and then run the program at 30 frames per second, you can use twice the number of polygons?

NH: Yeah, it’s kind of similar, but with input lag, you have to grind away on a lower program layer. If you can get just 1 more frame worth of time, you can do what you can during that frame, which makes things easier.

YO: Also, while we were trying to port the arcade version of Space Harrier, I thought releasing the port for 2,500 yen ($25) might be a little tricky since a remake already existed. I wanted to have some other versions ported as well, and since M2 had made progress on MegaDrive and  Mark III emulation, so we decided to make a bundle. But due to some concern that there’d be some confusion with the remake being released first, we added “II” to the title.

NH: We had this idea that if people thought the game was Space Harrier II from the MegaDrive, they might not pick it up. Actually, I remember Okunari-san saying “If we port this, people will be able to play it not only on the PS2, but on 3 and 4 as well.” Well, now you finally can play it on all versions on the PS3 I guess. (laughs) When the backwards compatibility feature was removed from the PS3, we were a little worried. (laughs) But now we’re in an age where all that work is available for 800 yen (~$8).

YO: The Game Gear version is also in SEGA AGES 2500 Space Harrier II as a hidden feature now, but at the start we had no intention of doing that. Namely because the Game Gear version is a downgraded version of the Master System one, and since it was built for a portable game system, the resolution wasn’t great for playing on a TV screen. Still, M2 said they wanted to include everything they could. However, since the hardware specs for the Master System and Game Gear differ, M2 couldn’t get the Game Gear version working and were about to give up on it. But we got it in at the very end.

NH: 7 years ago, my take on it was: “I don’t want to buy Space Harrier again.” I wanted to make a version that had everything you need.  (both laugh) Then later on we wound up developing the Wii and 3D versions. At this point I hope I can just ask for everyone’s forgiveness since I buy them all myself. (both laugh)

YO: Yeah we’d not planned to develop the Game Gear version at the start, but once we got past beta[4] it was like “Game Gear version got in on time! It’s done!” however it really wasn’t on time at all. (laughs) The manual was already done, and the release date was set so we couldn’t advertise it at all. So we wound up making it an unlockable feature and said: “Oh well, you get another game in there, it’s just hidden away.” But as a result, it seems that people thought that every installment of the PS2 SEGA AGES 2500 series had to have some sort of extra game in it.

NH: You were really brave to hear us out there at the very end.

YO: Well, you still send me outrageous requests even now… (both laugh)

NH: Oh I don’t know. I think we’ve gotten better…

YO: That’ll be the day! (laughs) But anyways, this theme of specs changing while M2 builds the ports certainly echoes down the line.

[5] SDI is a shooting game released in 1987 for Arcade and later the Master System. Quartet is a side scrolling shooter released in 1986 for Arcade and the Master System.

[6] SYSTEM 16 is a 16-bit arcade board released in 1985 that ran games like SDI, as well as Golden Axe, Fantasy Zone and Shinobi. Space Harrier runs on the same board as Hang-On, which is similar to System 16 but with more processing power.

[7] Assembly code is one step above coding directly in machine code. It’s generally considered very difficult to work with.

[8] Beta is a development milestone state that generally indicates the game is functionally complete, but there are bugs and glitches that need to be fixed before the game can be released.

– So the scene was set by SEGA AGES 2500 Space Harrier II.

YO: One of the most last-minute moments we had was with Fantasy Zone Neo Classic in SEGA AGES 2500 Fantasy Zone Complete Collection. Neo Classic was based on a game originally made by Sunsoft, so we had to rush to get a contract in place with them. (laughs)

NH: Oh really?

And the mysteries of Space Harrier keep on coming!

YO: Back to the subject at hand, Space Harrier was ported to the PS2 with M2’s considerable technical skill and all was grand. For a series based on older game ports, I thought we had a great launch, and we got a lot of feedback.

One instance that particularly surprised me was when we put S.D.I. & Quartet and Space Harrier II out for display at the Tokyo Game Show. Since it was our first time showing off the full version in front of customers, I was at the booth myself. The first people to stop by on the first day were M2’s first SEGA supervisor, Aso-san, who was also the developer for the original arcade version,  as well as two developers from ”Game Rotsubo”, who ported Space Harrier for the Super 32x and Sega Saturn.

– Whoa!

YO: I didn’t even have time to be surprised before one of the guys started playing. These guys are legends to me. They brought Space Harrier to the 32X and Sega Saturn, which had had much lower specs than the PS2. These guys played our PS2 version, with eyes as big as dinner plates. I mean, you know these guys LOVE Space Harrier to death, so of course they are going to be interested in people who work on it. So they played up to Stage 7 (Lucasia: where the mammoths come out), and then I heard one go, “Ah!”

SEGA 3D Classics - Space Harrier
The rock bug on the 7th stage, which is faithfully reproduced in 3D Space Harrier.

So I got all nervous, thinking “Oh man, what…” and then asked them about their impressions after they’d finished. They gave it their seal of approval, saying “It’s really well done.” But then they said “There’s one thing. On stage 7, there are these slanting boulders in the background. The issue is with the background horizon…. you see the boulders are supposed to be on the ground, and are only supposed to be displayed below the horizon line, and when Harrier runs on the ground, they’re clipping into the horizon line. If the line goes up, there’s a bug where the color gets a little weird and turns slightly black. That isn’t happening on this PS2 version.”

NH: In this case you’re seeing the correct graphic on the PS2 hardware, but that’s because it differs from the architecture of the original Space Harrier’s hardware.

YO: That’s how the boulders in the first half of the 7 stage display. The original staff said “it’s a bug, but it was pretty how the boulders sort of twinkled.”

– Huh, how about that.

NH: I don’t know if anyone else has pointed that out, but their comment was the first time we’d heard about it.

YO: I think in the end, they were probably the only ones who pointed it out. In any case, being a newbie myself, I wound up thinking the port had a long way to go, and we could do even better. Oh and there was another problem that came up regarding the height of the horizon line. We addressed this with the “Harrier’s moving area” option in 3D Space Harrier.

When the PS2 version was released, we saw comments on the net saying that if the player sits at the highest position on screen, the horizon line’s uppermost position would differ from the arcade board. We thought “Well, we built the game to the exact spec of the original, so why are people seeing differences?” At the time, we had no idea why. That and the sound quality. People said that the sound isn’t the same as the OST CD or the arcade version. Amps and other equipment will make it different from the arcade version at a very basic level anyways, but since M2 wanted to make sure there was no input lag they had to use some of the game’s processing power to eliminate it, and that slightly weakened the sound quality.

NH: From that point on, there were probably some games we worked on where there’s a difference in audio between the game and the Sound Test menus. If you noticed that, let us know. It’s easier to lighten the processor load in a Sound Test menu.

YO: You can hear the difference in the hidden sound mode in PS2’s Fantasy Zone Complete Collection.

NH: Yeah, I seem to recall we did it there.

YO: M2 is getting better at this, and the quality’s also rising since we are devoting more of the console’s processing power to sound emulation.

– Interesting (laughs). So it sounds like in your experience, the game’s sound quality was limited by the power of the console, to the extent that you were performing calculations internally and then outputting the sound.

NH: When using streaming output, you can’t reproduce the behavior where some sounds would disappear due to sound effects being played. It depends on the game, but a lot of people actually like that effect. We wanted to cater to that need. But if streaming is the best option for a particular game, we’ll go with that.

– You used both approaches in Galaxy Force II, right?

YO: Well for that collection, there weren’t that many titles included, so we thought we’d give it a shot. So yes, there’s a streaming version and an internal sound source version. Oh, and an FM Towns[1] version. (laughs)

NH:  For the streaming version of Galaxy Force II, we had a guy at Wavemaster record it for us, so it turned out really nicely. At that point we found out that the original PCB version outputs the L/R channels backwards. (laughs) Since the original was backwards and thus ‘correct’, we matched this up with the arcade speaker specs.

[9] The FM Towns is a PC variant made by Fujitsu that specialized in multimedia applications. Galaxy Force was released on the FM Towns with CD-DA streamed music.

– There’s always something, huh?

YO: So anyways, after releasing Space Harrier II on the PS2 in 2005, we decided to release Space Harrier onto the Virtual Console Arcade in 2009. Being blessed with another chance to release the title, we wanted to make sure the Stage 7 bug could be reproduced, as well as put some extra effort into the sound. We also wanted to look into the Analog Stick and Horizon Line problems.

– So you finally got a chance to poke around this mystery, eh?

YO: On SEGA’s side, we have a Space Harrier machine that we keep for cataloguing purposes, so I actually went down and played it in the warehouse. And it’s true; the horizon line in the PS2 version is higher than the arcade version. It was different. On the original machine, the Tomos enemies that appear in the 1st stage are easier to shoot. I wanted to know why the arcade version was so different, so I went into test mode to take a look and noticed that when I pulled on the stick, the analog input wouldn’t max out. Which means that the controls were programmed that way to move the cabinet.

When we made the PS2 version, we did look at the original arcade board, but we didn’t actually look at the full arcade cabinet. That’s why it’s different. So for the Wii Virtual Console Arcade version, we took the arcade control differences into account. The Wii version can be controlled using the nunchuk, after all, so for us, the Wii version was the one we were most satisfied with.

– So finally that puzzle was solved!

YO: But even after implementing the control corrections, we still got comments saying it wasn’t right. Something was still wrong with the horizon line. Now it was too low! We had players saying “You got it right on the PS2 version, so why couldn’t you do the same for the Wii version?” I decided to visit as many arcades that had Space Harrier machines as I could, and studied the various videos that were posted to the net. And there were cabinets where the horizon would rise as high as it did on the PS2 version.

– So in other words, the PS2 and the Wii versions were both accurate ports?

YO: We puzzled over why the horizon line was higher on certain cabinets, and the dev team came to the conclusion that the sticks in the cabinets were probably loose.  Our warehouse kit hadn’t really been used all that much, and it also gets maintenance from time to time, so it’s in pretty good condition. But the cabinets at arcades have been out there for over 20 years, and their sticks get worn out. When you fix an arcade stick that’s broken, its throw distance changes, and as a result the player’s movement also changes. When sticks loosen, you can move them further than you previously could, allowing you wider control of Harrier.

So anyone who plays the cabinet nowadays may be using a joystick that’s in poor shape, and they might find that the horizon line is higher than what they remember as the real Space Harrier, and we can’t deny that. Generally speaking, we were left with the conclusion that the Wii version is in line with what the developers imagined at the original release. As a side note, the 32X and Sega Saturn version differ in the same way, with the Saturn version’s horizon line staying low like the Wii version.


– Sounds like this one wasn’t all that straightforward.

YO: That’s why for the 3DS version, we believe we’ve addressed player concerns by putting in 3 levels of movement ranges.

SEGA 3D Classics - Space HarrierSEGA 3D Classics - Space Harrier
3D Space Harrier has loads of customizable settings, thanks to M2 and SEGA’s extensive porting experience. Every arcade version player has different memories of the title and care has been taken to replicate that.

What did it mean to add stereoscopic 3D to Space Harrier?

– OK Finally we are at the point where we can actually talk about 3D Space Harrier! (laughs)

YO: Three years since we released the Wii version and it’s finally here! (laughs) Sorry for the wait!

NH:  Geez, that was a super long leadup! (all laugh)

YO: When the Nintendo 3DS was released, it included Virtual Console on it, which led us to start working on Space Harrier. At the same time, Nintendo indicated to us that they were looking for games that also use 3D. I thought, “Man, I want to do that.” So I went to Horii-san and said “We’ve got to do this 3D thing,” and he burst my bubble saying, “Oh come on, that’s ridiculous! Do you have any idea how much trouble that’d be to do!?” I took a look at the sample 3D version of Xevious provided by Nintendo for reference, and I really wanted to do something similar, but I kept being told that re-making 2D games in 3D was a pretty big effort.

– Remaking a game originally built in 2D into 3D… tell us about that.

YO: If you want an idea of how hard it is, just consider how M2 has been building games. They’ve been using emulator techniques that replicate the hardware since the PS2 days. That’s one way of faithfully reproducing the originals, but the drawback is that it’s really hard to go back and add things to the code. For example, you wouldn’t be able to add in extra bosses, or build new stages.

NH:  That’s why you won’t see extra features that were added to console or PC ports of older SEGA arcade games in the SEGA AGES ports. They weren’t in the original game.

YO: Re-making games in 3D is almost impossible for similar reasons. When you take a character sprite that was originally in 2D and bring it into a 3D viewpoint, you have to build the graphic from scratch. So for example, back in the 8-bit era, very large enemies were often displayed as backgrounds. But if you did a simple 3D conversion of an enemy like that, it would end up being on a different plane from the player character and look like it’s out on the horizon. If you want real 3D, then it’s basically the same as rebuilding the game from scratch.

NH:  Some things you can change, and some things you can’t. At the time I thought we could probably build a visual copy of the game in 3D, and I wanted to. But cost-wise, there was no way it was going to happen, you know? This was back just before the 3DS release.

YO: But when I asked Horii-san if there wasn’t some way to rebuild the game in 3D, he said “Let’s do it” (both laugh)

SEGA 3D Classics - Space Harrier

– You guys are crazy! (laughs)

NH:  Well, if you pick up the 3DS version I’m sure you’ll understand, but you feel like you’re playing the definitive version Space Harrier when it’s in 3D, right? I know we’re already there, but when I played the game, I felt like we had finally arrived in the 21st century, that’s how much of a killer app Space Harrier3D was for me. Once we knew what it was going to look like, it really motivated us when we were working on it. The whole staff put a lot of thought into how we were going to get this into 3D because we knew that if we could get it done, it was going to be really cool.

YO: M2 told me that “This is going to be really hard to develop, so be aware of that,” to which I said “Let’s do it,” and so we did. Now of course, we’re SEGA, so if we’re going to make 3D games,  we had to start with a 3D shooter, which of course means Space Harrier. So there we were, working on Space Harrier for the 3rd time.

NHThat’s how we got to 3D Space Harrier. We had to recreate the game world (called Dragonland, for those who don’t know) in 3D from the graphical depth of the original arcade cabinet, which wasn’t ever made in 3D. There were people who helped and worked with development who’d never played Space Harrier before, and some told me they couldn’t get good at the game. When I asked them what they have trouble with, they’d say it was hard to tell whether objects were right in front of their character or not.

Once we had the game in 3D, the same people came back and said “OK, now I get it! I can play it now!” Hearing that made me really happy we went through with the project. We started this game because I wanted to do it, so the sales didn’t matter to us, but moments like that really surprised me.

– So by making the game 3D, it was easier to understand where enemies and objects are placed.

YO: For the PS2 version, we included a version of Space Harrier 3D originally released on the Mark III that you could play by putting in a cheat code. That game is much easier to play in 3D. When you can see things in three dimensions, you see where the background stops, and you know what to dodge, so it’s a lot easier that way. When you play the same mode in 2D, it’s really, really hard. On the other hand, one could say that 3D Space Harrier’s difficulty is a lot lower than the arcade original. The stage where you dodge the fast scrolling pillars in particular is a lot easier. Dodging enemy bullets is simpler, and you know how long you can wait before you have to get out of the way.

NHBeing easier to play is certainly one aspect. One thing I also really want people to notice is how much more spacious and expansive the game world feels in 3D. Check out the screen.

– In 3D, you only have to worry about what’s right in front of you. For 2D games you have to watch the whole screen, so the gameplay definitely changes.

YO: Yes, it’s the same game but different.

NH: There are still a lot of games that we have fun ideas for. For this game in particular though, I want to say that playing with the 3D effect off is out of the question.

YO: It’s the same for movies. If you watch the same movie in 3D and 2D, you certainly watched the same thing. But it’s a totally different experience.

– When I saw Space Harrier in 3D for the first time, I think it was a modified “3D” version of the X68000[1] release. I think the programmer must have figured out the positions and behavior of the background and sprites to build the 3D. I’m no expert though, so I’m just guessing. Still, for 3D Space Harrier, I imagine M2 had to get in there and actually fiddle with the ROM itself to get the arcade version running. How did you create the 3D effect? You’d need to understand not only the architecture of the original hardware and software, but also understand the structure of the hardware you’re porting to, as well as modifying your emulation engine, right?

NHYes, that’s right. You have to understand the underlying game before you can add things on top. For this project, we did it all using a method that’s similar to emulation, however strictly speaking, it’s not emulation.

YO: At the core, there’s a program running that’s based on emulation techniques.

NHSpecifically, the code that ran on the arcade CPU, the MC68000, isn’t used in 3D Space Harrier. Replacing that code allowed us to finally get the 3D working.

YO: That’s what we mean when we say this game is the result of all of the hard work and technical skill developed up until now.

NHSince we could take our time with Space Harrier 3D, we were able to do things like support wide screen.

YO: Wide screen support in this version is a first for any port of Space Harrier.  The only other game we’ve done that supported wide screen was the PS2 version of Galaxy Force II.

NHFor game design reasons, Harrier’s movement range is the same as it always was, but it just feels better to play in wide screen.

YO: This is the 3rd Space Harrier I’ve requested from M2, and it might really be the last Space Harrier, or at least the last port. So we wanted to make it the definitive version. When we were interviewed for the PS2 version of Space Harrier II, we said that if you bought the PS2 version, you’d never need another version, but 7 years has passed, and well… turns out there was still a lot of work to be done. (laughs)

NHI thought about it a lot, and after that the PS2 version was done, I told Okunari-san that I wanted to go and play the arcade kit in storage one more time. So I did, and while I was there, I put up a microphone next to the kit’s motor and recorded the motor sounds.

YO: Wait, you went just to record some sounds? (both laugh)

NHYeah, so? (laughs) When you play [3D Space Harrier] in arcade mode[2], you’ll hear sounds we put in, which are me hitting the buttons and the motor running. In that sense, this version’s got some funny quirks to it.

[10] The X68000 was a home computer made by Sharp Corp and released only in Japan in 1987.

[11] 3D Space Harrier features the ability to turn on sounds the arcade machine makes as well as have the screen gyrate as it would if you were playing a real arcade cabinet.

– Maybe in the future, we’ll have consoles that let you play in 3D, and you can reproduce the whole cabinet and feel of the arcade in your living room…the ideas are endless.

NHSince you can install games to hardware nowadays, something I’ve always wanted to do is take all the sounds from the games you own and recreate the cacophony of lots of attract screens in an arcade. You could make something like a virtual arcade.

– Recreate the entire atmosphere of the arcade, I see.

NHIt’s not in the cards at the moment, but it’s something I’d like to try one day. In any case, there’s tons of stuff I want to do. Like Thunder Blade or something. If there are 2,560,000 people out there who want that, I think SEGA would be happy to let us do that for them.

YO: Let’s consider it if 3D Space Harrier sells that many copies. Heck, 256,000 people would be fine. (both laugh)

– OK well it looks like our time is about up. Can you guys sum up the key points of Space Harrier 3D for us?

3D Space Harrier (3DS)

You can choose from 4 different display options: 4:3 like the original game, widescreen optimized for the 3DS, full screen, and an arcade cabinet mode that recreates the feel of the original machine.

YO: For Space Harrier 3D, it all comes down to the 3D support we’ve added that took so much effort as we described earlier. And it’s not a copy by eye, it’s based on the original code base, and it plays just the same. It’s also the first time Space Harrier has ever supported wide screen. And there’s also M2’s excellent arcade mode.

NH:  I hope people reading this to give that mode a try. It’s fun and brings back a lot of memories.

YO: When that mode first went in, I said to Horii-san, “Since the cabinet’s chair moves with the monitor in the arcade version, the screen shouldn’t actually tilt, right?” Remember?

NH:  Yeah yeah, I know. But, we’re talking about nostalgia here, you know? (laughs)

YO: So that part doesn’t quite match up with reality, but it definitely has an “ambiance” and it’s fun. Oh and the arcade kit sound effects are there too.

NHThe arcade cabinet’s motor watches the signals from the original arcade board, so it knows when you’re moving right, or when you’re moving left. The sound effect timing is all the same as the original.

YO: In addition, the background music quality has really improved, and we’ve finally put in an equalizer. We didn’t ask for it but M2 threw that in as an extra. (laughs)

NHIf you play around with the equalizer, you can get pretty close to the original arcade feel. Players can use it to recreate the same environment that they remember.

YO: There are presets too. I hope people give it a try.

NHOkunari-san might think we had a lot of free time on our hands by including the equalizer. (laughs)

YO: Even just playing it as-is out of the box, I think this port probably has the best sound reproduction than any previous one. This is in large part due to Manabu Namiki’s [1]involvement, right?

NHYes, Namiki-san checked the game until the very end. The extra song as well.

YO: Since M2 had hired Namiki-san around that time, he participated in the project as an internal staff member, and he was able to give the game really thorough oversight. The arcade environment sound idea started with him, right?

NHYeah, he had a lot to do with that. He’s the one who put out the idea for the arcade kit sounds. The motor and button sounds.

YO: For those sounds, you can’t just put a mic down and record them because there’s all these other loud sounds that get in the way, so we had to turn off all the cabinet’s fans and record the right, front and rear sounds over and over. Then we took the best samples out of those and included them. Same for the button sounds. Typical players might not care about this sort of stuff, but I hope there’s maybe one in a thousand who will really be into it. Every time this game is ported, people tell us “It’s not really Space Harrier without an arcade kit.” That’s totally true. However, since we can’t port the kit itself, we do what we can outside of that and this is how it turns out. So in a certain sense, 3D Space Harrier is our answer to that problem.

[12] Manabu Namiki is a Japanese video game composer.

– I see.

YO: Also, and this is a sort of down to the nitty gritty, but there was a bug in the PS3 and Wii versions where certain sound effects would play and not stop. It was in the original arcade game, and we’ve made the decision to fix it for this version. Up until now, we’ve prioritized reproducing the original arcade board as faithfully as possible, but now that it supports wide screen and 3D, the 3DS version no longer reproduces the original per se, and it wouldn’t be ideal for a first time player to run into a bug like that. So we fixed it. We also don’t force any sort of slowdown replication on the game. So I think it’s safe to say that this is the perfect version of Space Harrier.

– From what I’ve seen, I’m certainly hoping that’s the case.

YO: Lastly, if you watch the porting staff credits, you can find out all the names of enemies that appear in the game. We often heard from the fans that they wanted to know the enemy names, so M2 put in a little sequence that shows off the original character names.  The names come from a 10 year old game called Typing Space Harrier, where you had to type in the character names. Most of the characters besides bosses didn’t have names at the time, so Yu Suzuki named them. So these are official enemy names from the game designer himself. I had no idea about this until the guy who made Typing Space Harrier told me. I think fans of Space Harrier will be really happy about it. I mean, I could just go on and on. (laughs)

–  Alright, sounds like there’s still more to talk about.

Naoki Horii (below, NH): You know, for the Space Harrier arcade machine on the menu screen, what I really wanted to do was use the AR feature to put a Space Harrier machine in my room.

Yousuke Okunari (below, YO): We totally ran out of time for that one… (laughs)You know, when we were making the arcade machine’s model on the menu screen, we didn’t have any pictures of the cabinet from all three sides (front, back, side). I think we had the design layout for it, and pictures from certain sides only, but we didn’t have one from the front. However, awhile back, Dreamcast Magazine made a papercraft version of the cabinet, and wanted to put a picture of it in Space Harrier II’s manual for PS2. They had lent us some photos they were using to make the papercraft, which came in very handy. Thanks  Umeda-san! (laughs)

… However, there’s actually a difference between the papercraft cabinet and the model in-game. Can you guess what it is? It might be hard because it’s spinning around.

–  Hmm, I don’t know…

YO: See here on the back of the seat, there’s a little portion that looks like an exhaust pipe. On the machine in the warehouse that they photographed for the papercraft, it’s white. But on an actual arcade machine, there’s a light there which flashes red. It seems that the machine we keep in the warehouse is one of the first models, a prototype or a preproduction model, or something, but anyways there’s a light in the middle. Also, the one in the warehouse doesn’t have the gameplay instruction plate under the monitor. M2 noticed that later on and drew one up for us.

Other than the papercraft one, there was a toy version of the Space Harrier arcade cabinet built for UFO Catchers[13] as well, and that one has the white portion as well. We went out to some modern arcades and took pictures, and when you compare them, you can see the difference. I also asked M2 to redo the cabinet on the title screen once as well. You can’t really tell by looking at two dimensional photos, but once it was put into 3D, the differences in the molding were pretty apparent.

[13] Often called ‘claw crane’ games in the West.

–  So you had to make some more changes. You guys really get deep into the details. (laughs)

YO: Maybe we should talk about the controls too? The slide pad controls are similar to the arcade in the sense that once you let go of the slide pad, the stick goes back to neutral. But if you’re using a d-pad, it’s more console-like because when you let go, Harrier will stay in the same position. This has always been the case with previous ports. For people who played in the arcade, they’ll be used to having the stick return to neutral, but that’s not the case for console players. Oh and also, for this version, we’ve added touch screen support.

–  I really appreciated having the slide pad and d-pad controls active at the same time, and being able to switch between them on the fly. Rapid fire is included as well, and playing on the touch screen is easier than one might expect.

You can also toggle character movement between normal and reverse, and switch between three levels of auto-fire. B button is the auto-fire button, or you can touch the screen to use auto-fire. This game is really a testament to M2’s abilities.


The arcade version of HAYO OH, unleashed at last!?

And finally, since we have this opportunity, I’d like to talk about some additional content we’ve included in the 3D version as well.

–  … What?

NH: We’ve added the final boss from the Mark III version of Space Harrier, HAYA OH, in true arcade style. You can call it a reward for players that push the game really hard. HAYA OH’s music is played through the arcade sound generator as well. I hope it’s a nice surprise when you run into him in game.

–  Oh! Was that the ‘extra song’ that you referred to in our previous article?

NH: Yes, we were checking that track up until the very end.

YO: It doesn’t come out quite as crazy as the original… But you know, it seemed like there was some rule about the Space Harrier ports where HAYA OH would never be included in the arcade modes. M2 and myself really wanted to do something about that. At first we thought we couldn’t. But then we said, “let’s make it happen.”

NH: You know, if we hadn’t put HAYO OH in, we might have been able to get this game out last year… Just kidding. (both laugh) Anyways, he’s in there.

YO: This is what you get when you grumble about things for a straight year.

NH: We built HAYO OH per the original arcade programming. We basically went in and fiddled with the programs for SQUILLA and GODARNI[14] and were able to get HAYA OH working. I think it’s pretty impressive if you consider that HAYA OH is working on top of the original program. Like, this would probably actually work on the original arcade board. That’s the level at which we built it.

YO: Did Mr. Namiki do the song arrangement?

NH: The main programmer, Akira Saito[15], made the arrangement, and then Mr. Namiki came in and advised on specific parts of the track. If you know their work and give it a listen, I think you’ll be able to hear the synergy between them.

[14] SQUILLA and GODARNI are the 1st and 3rd stage bosses, respectively.

[15] Mr. Saito is a programmer at M2, who was in the past was involved in creating sound drivers for the X68000.

–  Sounds like a team-up that’ll make a lot of people happy.

YO: For the 3DS port, we’ve made changes to the game specs from the PS2 and Wii Virtual Console versions. We wanted to keep some of the gameplay tension, so we got rid of unlimited continues. So to get HAYO OH to appear, you need to get all the way to stage 18, starting from stage 1. You can change the number of lives and difficulty any way you want and use all 3 continues, but that’s the underlying condition.

We also put in a stage select for stages you’ve already cleared. So if you start on Stage 18 and beat VALDA without dying, you’ll fight HAYO OH.

If you can beat him, a menu item labeled “special” will show up. You can turn this off to prevent HAYA OH from appearing when you fulfill his requirements. Also, this options lifts the usual 3 continue limit and you’ll have unlimited continues. So it’s a bit more arcade-like that way.

–  Sounds like something I can look forward to. So is the “SEGA 3D Remake Project” going to keep going?

YO: Well a lot of that will depend on how 3D Space Harrier does, but since we think it turned out great in 3D, we’re going to continue development along this line. Lots of people are guessing which games we might do next, and we want to make some of those titles happen. But there are going to be some titles that make people say: “What? You’re going to remake that in 3D?” I’m looking forward to seeing the reaction.

That said, as I mentioned early, actually remaking games in 3D is very work-intensive and difficult  compared to putting games out on the Virtual Console. It’s similar to when we were originally porting things to PS2. It’s the same with porting Game Gear titles to Virtual Console, but the amount of games we can keep putting out depends on how fans react. Personally I keep we can just keep going and going.

We started developing the SEGA 3D Remake Project at the same time as the 3DS Virtual Console. Game Gear got started in March of this year [16], and there’s been over 10 titles that have gone up for it on Virtual Console. We want to keep working next year to get games out for the Virtual Console and the SEGA 3D Remake Project.

NH: Going forward, I want to put a lot of polish into the 3D, and take our time releasing whichever ones seem profitable. I want to take the games that people think would be fun to play in 3D, build them well and get them out in the wild. I hope everyone will support us.

[16] 2012 was the date of this article, so March 2012 for the Japanese Game Gear Virtual Console.

–  From here on out, do you expect the 3D remake work to get more efficient as you continue to release more of these games?

NH: Since we’ve built a shared architecture that’s the basis for our ports, we expect things to pick up. It also depends on the pros and cons of the particular game we are working on.

YO: Yeah, there are titles that people think would be absolutely amazing in 3D, but if you ported them, the graphics would look totally wrong in 3D. So to get a game like that into 3D, you’d be better off building it from scratch off a visual reference. So then the next question is what’s the most efficient way to do that. In any case, there are some follow-up games that I really want to get out, so the series won’t end with Space Harrier.

NH: There could be a game that has a ton of fan support, for which we’ll forego the shared architecture and spend the extra time remaking it on its own.

–  If that happens, it might be hard to put a price on it, don’t you think?

YO: Well, Space Harrier is Space Harrier, so we wouldn’t be able to justify a significant price difference from what we already have on Virtual Console. We’ve heard a lot of people wonder how many times they can actually buy Space Harrier, but this time the game is in 3D, which really showcases how different it is from previous ports. We hope everyone gives it a shot.

NH: Definitely.

YO: Thank you for your support!

–  Thank you very much as well!


Copyright ©2013 Impress Watch Corporation, an Impress Group company. All rights reserved.